Password policy operation failures with error message of "Salt infrastructure is not configured. Cannot apply fleet settings."

Products

• VCF Operations

Issue/Introduction

The password policy apply or compliance check task fails with the error message:

Salt infrastructure is not configured. Cannot apply fleet settings.

Environment

VCF Operations 9.1.1

Cause

Salt infrastructure is not available in the customer environment.

Resolution

Ensure that the required salt infrastructure is available in the environment for the password policy workflows to succeed.

Refer to the resolution from Fleet Management page shows "get started" page even though all 9.1 Fleet Management components are deployed.

 

Validate the requirements for the Fleet Management page:

1. Log in to VCF Operations and navigate to Build > Lifecycle > VCF Management > Components and validate that the required VCF Management Services components are present:
   • VCF services runtime
   • Salt RaaS
   • Salt master
2. Click on each required component and validate the Status is Running.
3. Navigate to Manage > Licensing > License & Registrations > Version 9+ and validate the vCenter Systems show Yes in the Fully Licensed column.
4. Navigate to Operate > Administration > Integrations and expand the VMware Cloud Foundation grouping.
5. Validate the VCF integration(s) show Collecting in the Status column.
6. Expand the Management domain.
7. Validate the vCenter shows 9.1.0 (or higher) in the Version column.

Additional Information

Required Component Binaries for VCF 9.1 upgrade