Requesting CA 2E and/or PTC Implementer License Keys

Products

• CA 2E

Issue/Introduction

How to request CA 2E and/or PTC Implementer License Keys

Environment

CA 2E 8.x

Resolution

When requesting CA 2E Licenses, gather the following information and open a Broadcom Support Case:

1.  Broadcom Site ID that the CA 2E License should be registered to

2.  Output from the following commands will confirm the CA 2E version and patch level:

DSPDTAARA Y2SY/YRLSNBRRFA
DSPDTAARA Y2SY/YFIXNBRRFA

If PTC Implementer is used with CA 2E, the following commands will confirm the PTC Implementer version and patch level:

DSPDTAARA PTCIM/ISVERSION  
DSPDTAARA Y2SYCM/ISVERSION  

3.  The IBM iSeries OS level

4.  Serial number #

5.  Model #

If PTC Implementer is used, in addition to the information above, the following additional information is required:

1.  Processor feature code

2.  Partition ID

3.  Is the license key required for the host node, receiver node or both?

Additional Information

1.  CA 2E licenses generated from 8.1 onwards can be used all the way up to 8.7 provided that CA 2E is installed on the same machine

2.  Refer to the following KB article for information on how CA 2E Licensing Works and how to apply CA 2E licenses