For precheck errors that cannot be resolved, please open a support case with Broadcom to get further assistance. Note, precheck failures do not qualify as Severity 1.
For VCF 5.x environments, SDDC prechecks are a subset of NSX upgrade prechecks. In most cases, SDDC prechecks are sufficient so proceed with the upgrade through the SDDC Manager UI. If there is a preference to run both SDDC and NSX prechecks then an out of band NSX upgrade must be performed. This involves uploading the pre-check upgrade bundle (.pub) on the NSX UI and running the prechecks. Then upload the manager upgrade bundle (.mub) on the NSX UI and initiate the upgrade directly from NSX.
Review the NSX Alarm dashboard on the NSX UI, Home -> Alarms. Action and resolve any open High or Critical Alarms.
Check all Edges have a DNS server configured using the admin cli, get name-serversandget search-domains. If the NSX Manager has a CA cert or dual stack configuration, the Edge upgrade will fail if DNS is not configured. To configure DNS, on the Edge admin cli use set name-servers <IP address> and set search-domains <domain name>