Error: Tier0, Tier1 and connected overlay segments should belong to same overlay transport zone. (Error code: 503108)
Article ID: 395324
Updated On:
Products
Issue/Introduction
- This is a federation environment
- There is only one Overlay Transport Zone
- Attempting to update T0 to add/edit uplink interfaces, receives the following error:
- NSX manager log (/var/log/proton/nsxapi.log) reports the following similar error:
ERROR http-nio-127.0.0.1-7440-exec-22 ProviderInterfaceServiceImpl 51996 POLICY [nsx@6876 comp="nsx-manager" errorCode="PM503108" level="ERROR" reqId="5e581337-####-####-####-########" subcomp="manager" username="admin"] Tier0, Tier1 and connected overlay segments should belong to same overlay transport zone /infra/sites/default/enforcement-points/default/transport-zones/1b3a2f36-####-####-####-########, but gatewat transport zone is /global-infra/sites/NSX-MGMT-NJ/enforcement-points/default/transport-zones/1b3a2f36-####-####-####-########
Environment
VMware NSX
Cause
The global-infra overlay segment has a transport zone path attribute populated, which conflicts with the infra overlay segment transport zone path.
Resolution
This issue is resolved in VMware NSX 4.2.2.1, available at Broadcom downloads.
If you are having difficulty finding and downloading software, please review the Download Broadcom products and software KB.
Additional Information
Feedback
