NSX host preparation fails with error "Credentials for the host need to be specified"
search cancel

NSX host preparation fails with error "Credentials for the host need to be specified"

book

Article ID: 322453

calendar_today

Updated On:

Products

VMware NSX

Issue/Introduction

  • When preparing a host for NSX-T, the following error is displayed: 
     Credentials for the host need to be specified.
  • When adding the transport node profile and configuring NSX, an error may be noted indicating that the IP already exists for that node. 
  • NSX-T manager log /var/log/proton/nsxapi.log, shows messages similar to the following:
2023-02-07T11:12:42.577Z WARN task-executor-6 HostTnPrepServiceImpl 6377 FABRIC [nsx@6876 comp="nsx-manager" level="WARNING" subcomp="manager"] Error occurred during HostTn creation for discovered node ########-####-####-####-############:host-###
...
2023-02-07T11:12:42.577Z INFO task-executor-6 TransportNodeProfileUtilImpl 6377 FABRIC [nsx@6876 comp="nsx-manager" level="INFO" subcomp="manager"] Record validation error in TNC for discovered node ########-####-####-####-############:host-### message : Node with this IP ###.###.#.## was recently deleted and is being cleaned up. Please retry registering after some time.
2023-02-07T11:12:42.587Z INFO task-executor-6 DiscoveredNodeFinderImpl 6377 FABRIC [nsx@6876 comp="nsx-manager" level="INFO" subcomp="manager"] Returning discovered nodes parent id as ########-####-####-####-############:domain-##### for given external id ########-####-####-####-############:host-###


Cause

This issue can occur due to inconsistent records in the NSX Corfu database.

Resolution

This is a known issue impacting NSX.

Workaround:
If you believe you have encountered this issue, please open a support case with Broadcom Support and refer to this KB article.
For more information, see Creating and managing Broadcom support cases.


Additional Information

If you are contacting Broadcom support about this issue, please provide the following:

  • NSX Manager log bundles
  • ESXi host log bundles for hosts that are failing to configure as transport nodes.
  • Text of any error messages seen in NSX GUI or command lines pertinent to the investigation

Handling Log Bundles for offline review with Broadcom support