Get key parameters for Edge SWG (ProxySG) with SNMP using OID Value.

Products

• ProxySG Software - SGOS

Issue/Introduction

How to get the OID Values for Edge SWG (Proxy SG) SNMP polling?

How you can get the OID for parameters like CPU, Memory Pressure, Up Time, etc. of the Edge SWG (Proxy SG) for your SNMP manager for SNMP Polling?

 

Environment

For Proxy SG integration with the SNMP Manager, you can refer to the below Tech Doc Guide.

https://techdocs.broadcom.com/us/en/symantec-security-software/web-and-network-security/edge-swg/7-3/getting-started/page-help-administration/page-help-snmp.html

Once you have configured SNMP settings at the proxy SG, then you can use the below OID at your SNMP manager for polling and collecting the data for monitoring on the different key parameters. 

Here in the table, you can see some most useful key parameters OID. 

For more parameters, you can download the MIB files that are available in the support portal download section.

For downloading the MIB file, please refer to KB167676.

 

Resolution

OID Value	Description
.1.3.6.1.3.25.17.3.1.1.0	CPU Load
.1.3.6.1.3.25.17.1.4.0	UP Time
.1.3.6.1.4.1.3417.2.2.1.1.1.1.3	Device Disk Status
.1.3.6.1.4.1.3417.2.11.2.3.4.0	Memory Pressure
.1.3.6.1.4.1.3417.2.11.3.1.3.2.0	HTTP Client Active Connections
.1.3.6.1.4.1.3417.2.14.1.1.1.1.1.8	ICAP Queued Connection Requests
.1.3.6.1.4.1.3417.2.12.1.1.2.0	Device Health Monitor Check
.1.3.6.1.4.1.3417.2.11.3.1.1.11	Currently created client workers
.1.3.6.1.4.1.3417.2.11.3.1.1.12	maximum acceptable concurrent client workers

 

Additional Information

Here is a link to the SNMP Critical Resource Monitoring Guide