DLP Solution Pack Quick Install Guide

Products

• Data Loss Prevention
• Data Loss Prevention Core Package
• Data Loss Prevention Enforce
• Data Loss Prevention Enterprise Suite
• Data Loss Prevention Plus Suite

Issue/Introduction

This is a Quick Solution Pack Import Guide for the Data Loss Prevention Endpoint Agent.

For the full "DLP Quick Install Guide" please visit the following link: DLP Quick Install Guides

Environment

Windows
Linux

Cause

What is a Solution Pack: A solution pack contains configured policies, response rules, user roles, reports, protocols, and the incident statuses that support a particular industry or organization.

Resolution

VERSION DISCLAIMER: Please note that the following instructions are version agnostic, and can generally be used on any currently supported version. As such you will find several variables denoted such as "<DLPversion>" to indicate where a version number "should" be used. You will need to replace these variables with the appropriate version that you are attempting to use. Below are a few examples of such translations... <DLPversion>  = 15.8, 16.0, 16.0.1 or 16.0.2 <DLPfullversion>  = 16.0.10000.60631 <ORACLEversion>  = 193000 or 19.3.0.0 <JREversion> = jdk8u322-b06 or 8u322b06

 

Note: Solution Packs MUST be installed before any Detection Server or Policy is created/added.
Note: Only ONE Solution Pack can be imported. Do NOT attempt to import multiple solution packs.

Download Installers: https://support.broadcom.com/group/ecx/productdownloads?subfamily=Data%20Loss%20Prevention
Solution Pack: Symantec_DLP_<DLPversion>_Solution_Packs.zip

Unzip the Solution Packs:
     - Can be unzipped anywhere, in this case we chose the following path...
          Windows: C:\DLP Installers\Solution Packs\<DLPversion>\
          Linux: /DLPInstallers/Solution_Packs

Import the Solution Pack:
    1 - Stop the SymantecDLPManagerService
    2 - <Windows> Open CMD (Administrator)
    3 - Change Directory to the DLP \bin directory
          Windows: cd "C:\Program Files\Symantec\DataLossPrevention\EnforceServer\<DLPversion>\Protect\bin"
           

          Linux: cd /opt/Symantec/DataLossPrevention/EnforceServer/<DLPversion>/Protect/bin

    4 - Run the import command
          Windows: SolutionPackInstaller.exe import "C:\DLP Installers|Solution Packs\<DLPversion>\Financial_<DLPversion>.vsp"
          Note: We selected the Financial Solution Pack in this case, keep in mind that you can ONLY select ONE Solution Pack.
         

          Linux: ./SolutionPackInstaller import "/DLPInstallers/Solution_Packs/Financial_v<DLPversion>.vsp"
          Note: We selected the Financial Solution Pack in this case, keep in mind that you can ONLY select ONE Solution Pack.
         

        5  - Once complete, please look for the message confirming the import was successful.
         

        6  - Restart the SymantecDLPManagerService.
        7  - Now when you check your Policies, you should see a list of Financially related policies.
         

Additional Information

Proceed with the Windows Detection Server installation using the following link:
     Proceed with installing a Detection Server

Proceed with the Linux Detection Server installation using the following link:
     Proceed with installing a Detection Server