DLP Detection Server Quick Install Guide for Windows

Products

• Data Loss Prevention
• Data Loss Prevention Core Package
• Data Loss Prevention Discover Suite
• Data Loss Prevention Endpoint Discover
• Data Loss Prevention Endpoint Prevent
• Data Loss Prevention Endpoint Suite
• Data Loss Prevention Enterprise Suite
• Data Loss Prevention Network Discover
• Data Loss Prevention Network Email
• Data Loss Prevention Network Monitor
• Data Loss Prevention Network Monitor and Prevent for Email
• Data Loss Prevention Network Monitor and Prevent for Email and Web
• Data Loss Prevention Network Monitor and Prevent for Web
• Data Loss Prevention Network Prevent for Email
• Data Loss Prevention Network Protect
• Data Loss Prevention Network Web
• Data Loss Prevention Plus Suite

Issue/Introduction

This is a Quick Install guide for the Data Loss Prevention Detection Server

For the full "DLP Quick Install Guides" please visit the following link: DLP Quick Install Guides

Environment

Windows

Cause

The Detection Servers are core components required for Data Loss Prevention.

Resolution

VERSION DISCLAIMER: Please note that the following instructions are version agnostic, and can generally be used on any currently supported version. As such you will find several variables denoted such as "<DLPversion>" to indicate where a version number "should" be used. You will need to replace these variables with the appropriate version that you are attempting to use. Below are a few examples of such translations... <DLPversion>  = 15.8, 16.0, 16.0.1 or 16.0.2 <DLPfullversion>  = 16.0.10000.60631 <ORACLEversion>  = 193000 or 19.3.0.0 <JREversion> = jdk8u322-b06 or 8u322b06

 

Download Installers: https://support.broadcom.com/group/ecx/productdownloads?subfamily=Data%20Loss%20Prevention
DLP Platform Installer: Symantec_DLP_<DLPversion>_Platform_Win-IN_<DLPfullversion>.zip
Detection Server Installer: Symantec_DLP_<DLPversion>_Platform_Win-IN_<DLPfullversion>\DLP\<DLPversion>\New_Installs\Release\DetectionServer.msi

 

Install Java:
     Java AdoptOpenJRE Quick Install Guide

Create the Environment Variables:
     Creating Environment Variables Quick Install Guide

Open Firewall Ports:
     Quick Configuration Guide for Windows Firewall

 

Install the DLP Detection Server:
     1 - Run the DetectionServer.msi
       
       
       
    2 - Installation Directory

       
    3 - Data Directory

       
    4 - You may need to use the "Browse" button to set the location.

       
   5 -  FIPS: Should not be used unless specifically required by your Organization.

       

6 - Select new user or existing user
       
   7 - Create the service user name

     Username: SymantecDLP
     Password: <YOUR PASSWORD>

       
     8 - Add the IP address of this detection server.

     Host: IP Address of the Detection Server
     Port: 8100 (default)

       
9 -  Choose if it is a standard detection server or cluster scanner.   

Detection Server: Used to install ALL Detection Server types
     Data Node: Used for Grid Scanning
     Worker Node: Used for Grid Scanning

       
       
       

Add your Detection Server to the Enforce Console:
    1 - Open the Enforce Web Interface
          https://<enforce>/ProtectManager/Logon
          System > Servers and Detectors > Overview
    2 - Click on "Add Server"
          Select "Software Server"
    3 - Select your Detection Server Type:
       
     - Specify the Detection Server Details
       
     Name: The display name of the detection server in the Enforce Console
     Host: Servername or IP Address of the Detection Server
     Port: Port for the detection Server to listen to for Enforce (default is 8100)

    4 - Save the Server

The Detection Server should report in within a few seconds. If it does not, simply restart the Detection Server Service (Detection Server), and the SymantecDLP Detection Server Controller Service (Enforce).

Additional Information

Installation: 
     Agent Installation