From the clp-services log: "WARNING: 100% of /encrypted-data in use" or "/encrypted-data now 100% full"
This issue is caused by the /encrypted-data partition on the Content Analysis filling up.
The solution is to clear as much un-needed data from this partition and try importing the certificate again. Data that is stored in this partition consists of packet captures, and troubleshooting logs. It can also fill up fast if too many logs are set to a log level below ERROR (i.e., INFO) under settings.
To clear out old packet captures:
To clear out old troubleshooting logs:
To check the log level settings:
After clearing old troubleshooting logs and packet captures out, import the certificate again.
To monitor this partition against future issues, an SNMP trap is available. More on that can be found here.