NTP shows as not synchronized when running
status_check on the Advanced Threat Protection's (ATP) Command Line Interface (CLI).
Service NTPD status - FAILED. Some possible causes and recommendations:
1. NTP is misconfigured on the ATP appliance. Check your appliance settings.
2. Network connectivity problems. Re-evaluate your network and firewall rules.
3. NTP server issue. Verify the functionality of the NTP server.
NTP NOT synchronized!
Please fix NTP configuration, else
the appliance may not function properly.
The Root Dispersion of 10.0s is higher than the expected 1.5s
if the time servers is a DC, change
*HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\* LocalClockDispersion from 10 to 0