Unable to update SSL Visibility software due to [Errno 28] No space left on device
Updated On:13-05-2017 12:36
SSL Visibility Appliance Software
When you try to update the SSL Visibility software, it is possible that you receive the following errors in some isolated instances and the SSL Visibility fails to update.
Upload error : must be string or buffer, not instance
Upload error : [Errno 28] No space left on device
1. Should this happen, SSH into the CLI Console and execute "debug disk" command. Ensure there is sufficient storage available. SV4800> debug disk Filesystem Type Size Used Avail Use% Mounted on rootfs rootfs 2.0G 741M 1.1G 41% / /dev/sslv/root ext4 2.0G 741M 1.1G 41% / none tmpfs 9.8G 24K 9.8G 1% /tmp none tmpfs 9.8G 4.0K 9.8G 1% /var/lib/snmp none devtmpfs 9.8G 4.0K 9.8G 1% /dev none tmpfs 2.0G 360K 2.0G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 9.8G 4.0K 9.8G 1% /run/shm /dev/mapper/sslv-ui ext4 976M 21M 905M 3% /opt/sslv/ui /dev/mapper/sslv-log ext4 3.9G 499M 3.2G 14% /var/log /dev/mapper/sslv-data ext4 31G 9.8G 20G 34% /opt/sslv/data
If there are highly utilized partitions, contact Support to assist in freeing up the disk space.
2. If there is sufficient storage available, the problem is likely due to a shortage of memory. In this case, the software update could be scheduled to a time where load is lower on the appliance. Another option is to reboot the SSL Visibility appliance to free up memory and retry the software update.