Hardware diagnostics can be performed at boot time on the NPM/APM/CPM boards if enabled.N/A
Hardware diagnostics can be performed on the NPM/APM/CPM boards if enabled.
If you wish to generate the diagnostics at boot time, make sure the diagnostics are enabled, schedule a window, failover to the other chassis (if DBHA) and reload all (if diags are enabled on all modules). This will log all the diagnostics data to the messages file.
If it is required to enable boot diagnostics on slot(s), there are various ways of achieving this.
If instructed by Blue Coat technical support to enable boot diagnostics, use the command
(These examples assume a 14 slot chassis. Change as appropriate)
To display current status of diagnostic settings: