I need the SNMP OIDs (object identifiers) for current and peak rate so I can generate a bandwidth utilization with peaks graph.
The OID for Peak Rate is 126.96.36.199.4.1.23188.8.131.52.184.108.40.206 (SNMP-ClassRate).
The OID for Current Rate is 220.127.116.11.4.1.2318.104.22.168.22.214.171.124 (SNMP-ClassCurrentRate).
To find the OID for the class you want to poll, from the PacketShaper command line type:
It will display the class information including the Class id which is used for the SNMP OID value.
class show inbound/default
Traffic Class: /Inbound/Default
Class Flags: built-in inherited policy
Rule Types: match-all
Current guaranteed rate 0 excess rate 0
[1 ] match-all
Policy Flags: priority nontcp-squeeze nonweb-refuse web-http-refuse
Class id (for SNMP and Measurement Engine): 5
Use the "Class id" for the classes you want to monitor and replace 0 on the above OIDs with the "Class id" number. For example, Inbound/default has a class ID of 5 and Outbound has a class ID of 52, so the OIDs would be:
126.96.36.199.4.1.23188.8.131.52.184.108.40.206 for Inbound Peak Rate
220.127.116.11.4.1.2318.104.22.168.22.214.171.124 for Outbound Current Rate