Identifying the serial number of your ProxySG
You want help identifying the serial number of your ProxySG
The serial number can be viewed in the Management Console, from the command line interface, or on the actual device itself.
FROM THE MANAGEMENT CONSOLE (https://<ip.address.of.proxysg>:/8082/ ):
SGOS 5.4.x or higher: The hardware serial number will be displayed on the top of the screen in a dark blue marquis. The marquis will show the model number, the serial number (S/N), and the version of SGOS running on the ProxySG.
SGOS 5.3.x or lower: Click on the "Home" text link in the upper right hand corner of the Management Console. This will present a splash page which will contain both the hardware serial number and the SGOS version currently running.
FROM THE COMMAND LINE INTERFACE (CLI):
Once connected to the CLI, use the "show ver" command to display the hardware serial number and SGOS version.
PHYSICAL LOCATION ON THE UNIT:
ProxySG model 200/210: The labels for these appliances may be found in one of two locations:
ProxySG model 510/510: Facing the rear of the unit, you will see the serial number towards the right side near the location where you can install an option card. The serial number sticker will be either above or below this slot.
ProxySG model 8100: The label for these appliances can be found in two possible locations: