You run a Create Disk Image job, the target computer boots into Automation, the agent appears for a moment, then it boots back to production without capturing an image. A message is displayed in the console: "Imaging Process Complete" indicating success, but no valid image file was created.
Invalid Command Line switches may be present that will cause this problem. "> /dev/console" is not a valid switch in a Windows PE environment.
In the Ghost Solution Suite console:
If your automation environment is WinPE the very last thing that should appear in the Additional Parameters field is "-SURE". If you see "/dev/console" as a command line switch on a Windows PE environment it will cause this problem.
If the Automation Environment is set to "Default Automation" and you are seeing "/dev/console" it may be because your default boot option is a Linux based PE environment. You may want to change the Default Boot Option. Here's how: