When using Ghost64.exe (build 184.108.40.20670 or 220.127.116.1160) to restore a BIOS based image to a UEFI only machine, or to a Hybrid UEFI machine (tries UEFI boot first and then BIOS), the computer fails to post after a reboot, making the machine unusable.
The firmware on a machine where UEFI has been implemented needs location information for the System and Boot Partitions, but in some cases this causes a firmware failure. Limited instances of this behavior have been reported to Support of this issue when restoring a BIOS based image to a machine running in Hybrid mode (machine tries a UEFI boot then BIOS).
Symantec has a solution that no longer affects the firmware and it can be obtained by contacting Support as per the instructions provided at http://www.symantec.com/support/contact_techsupp_static.jsp
Systems that have been reported to be experiencing the problem:
Microsoft Surface Pro 3 64bit UEFI
Dell R620 with a Dell PERC H710P 4 disk Raid 6
IBM Server Models x3550 M4, x3560 M4 and HS23