Symantec VIP Quick Start Guide: UNIX and Linux authentication
search cancel

Symantec VIP Quick Start Guide: UNIX and Linux authentication

book

Article ID: 150657

calendar_today

Updated On:

Products

VIP Service

Issue/Introduction

 This KB article covers the quick start guide for the Symantec VIP Pluggable Authentication Modules for Unix and Linux Syatems.

Resolution

Remote access services on Unix and Linux such as ssh, local login processes, and even privilege escalation can all leverage a common system to provide authentication, authorization, and related services called Pluggable Authentication Modules or PAM.  Symantec VIP integrates with PAM to provide two factor authentication for various services on Unix and Linux platforms.  

VIP Quick Start Guide: UNIX and Linux authentication

This guide is separated into two Sections:

    Section 1: Installing the Symantec VIP PAM integration module

This section provides some additional background to augment the integration guide available with the integration component download.  

Additionally, a new installer is available for both interactive and non-interactive (unattended) installation.

    Section 2: Background on the PAM subsystem

This section provides background on the PAM subsystem itself and is an abbreviated primer.

 

PAM Integration

Section 1 Installing the Symantec VIP PAM integration module

Contents

Installation options

Choosing a Validation Server

Supported Systems

Installing on Linux

VIP PAM integration module arguments

Configuring PUSH authentication with PAM

Troubleshooting Tips

Appendix A: Additional Resources and Guides

Appendix B: Tables

PAM Installer Bash Script

Installation options

The installation details are described in Symantec’s “Integration Guide for Pluggable Authentication Modules (PAM)” and can be summed up as:

  • Configure the associated Validation Server on VIP Enterprise Gateway
  • Move three binaries to two folders
  • Update the PAM configuration
  • Update other configuration if necessary (such as sshd_config)

These steps are unordered – all need to be completed, but they work slightly better in the order listed above.

Choosing a Validation Server

Symantec VIP Enterprise Gateway offers only one validation server to support VIP’s integration component (displayed below), but other ones work

To enable PUSH authentication, a custom one must be selected.  This is covered in the Configuring PUSH authentication with PAM section, along with a picture of the validation server.

Supported Systems

 

This author successfully tested Symantec’s VIP integration components on the following systems listed below.  However, what may test successfully and what is supported by any organization can be different.

PLEASE NOTE: The systems tested may or may no longer be supported by the vendor and the Symantec VIP integration component may or may not be supported by Symantec.  Check with the vendor and Symantec’s current recommendations for complete details.  The systems listed below are for informational purposes only.

RedHat Enterprise Linux

RHEL 5

RHEL 6

RHEL 7

5.1

6.0

7.0

5.2

6.1

7.1

5.3

6.2

7.2

5.4

6.3

7.3

5.5

6.4

 

5.6

6.5

 

5.7

6.6

 

5.8

6.7

 

5.9

6.8

 

5.10

 

 

5.11

 

 

 

Ubuntu Desktop

 

Ubuntu Server

10.04 (64-bit only)

10.0.4.3 (64-bit only)

12.04 (64-bit only)

11.10 (64-bit only)

12.04.2 (32- and 64-bit)

14.04 (64-bit only)

12.04.3 (32- and 64-bit)

16.04 (64-bit only)

14.04 (32- and 64-bit)

 

16.04 (32- and 64-bit)

 

 

SUSE (64-bit only)

 

OEL

 

CentOS

10.1

5.5

5.8

10.2

5.7

6.2 (32- and 64-bit)

10.3

5.8

6.3

10.4

5.9

6.4

11

5.10

6.5

11 SP1

6.3

6.6

11 SP2

6.4

7.0

11 SP3

6.5

 

11 SP4

 

 

12 Server

 

 

12 SP1 Server

 

 

 

Installing on Linux

To simply the installation process, a short installation script provides an interactive configuration experience and a non-interactive experience (for deployment to multiple systems).  There are two “parts” to the configuration: the raw installation of the executables plus the associated configuration and then a sample integration with various PAM-aware applications.

PLEASE NOTE: The PAM application integration is merely to test that the VIP integration module is functional.  Embedding this within any particular system’s configuration will require careful planning and consideration.  See Background on the PAM subsystem for background on reasoning about PAM syntax.

Interactive installation is available with superuser permission (generally as root or a member of the sudoers file).  Start the install as follows:

./symc_pam_install.sh

Installing this on multiple systems at one time will still require planning, but moving the files to the correct location is a nuisance that this script may be able to assist with.

A “quick” method with the “secret=password” flag can test the syntax, but a secure implementation will rely upon a secret file accessible when the script is ran.  One way to create this file is to use the included camouflage utility as follows:

./camouflage password > mysecretfile

The RADIUS shared secret can contain all the special characters except for the following:
 ! " & $ # =

But securely distributing the password in an automation script still needs to be done.

An alternative method involves pre-generating a series of these files on a secure computer and distributing each “installation package” uniquely to each system.

Install syntax for three non-interactive options follows:

     ./symc_pam_install.sh

{ip=aa.bb.cc.dd} {port=ffff}

{secret=password|secretfile=file} [timeout=gg]

[retries=hh] [--ssh|--logon]
 

     ./symc_pam_install.sh

--force {ip=aa.bb.cc.dd} {port=ffff}

{secret=password|secretfile=file} [timeout=gg]  

[retries=hh] {--ssh|--logon} [log=file]
 

./symc_pam_install.sh

--quiet {ip=aa.bb.cc.dd} {port=ffff}

{secret=password|secretfile=file} [timeout=gg]

[retries=hh] {--ssh|--logon} [log=file]

ip: The IP address of the VIP Enterprise Gateway server
port: The port of the configured Validation server on the VIP Enterprise Gateway server
secretfile: A pre-masked shared secret supplied in a file at that location.
timeout: The timeout, in seconds, to await a response from VIP Enterprise Gateway’s validation server.  Defaults to 10 if left unspecified.
retries: The number of times to attempt to communicate with VIP Enterprise Gateway’s validation server before giving up.  Defaults to 3 if left unspecified.
--ssh To specify that a sample integration should be attempted with the ssh service.
--logon: To specify that a sample integration should be attemptd with the logon service
--force Ignore questions and attempt the installation (will overwrite configuration files).  Installation logs written to /tmp/symc_pam_install_log_DATESTAMP.log by default,  unless overriden by the log= parameter.
--quiet: Will attempt the installation, but will fail if interaction is necessary.  Installation logs written to /tmp/symc_pam_install_log_DATESTAMP.log by default, unless  overriden by the log= parameter.
--log Will store installation logs at a different location, when using --quiet or --force.

 

 

VIP PAM integration module arguments

Symantec’s VIP PAM integration supports several arguments that can be specified in the PAM configuration file:

Argument

Meaning

no2fa group1:group2:…

The defined local groups “group1”, “group2” are not prompted for a Security Code.

prompt=<prompt_string>

Change the prompt offered to users that need to provide a security code.

conf=<filename>

Changes the configuration file that identifies where the VIP Enterprise Gateway validation server is located: IP, port, shared secret, timeout and number of retries are stored in there.

 

The default location is: /etc/raddb/vrsn_otp

split_password

The last six characters are peeled off of the password and sent as the Security Code.  The remaining characters are sent to the next PAM module for authentication.

local_ip=aa.bb.cc.dd

Useful if this system has multiple IP addresses and used to select an adapter to send authentication requests to VIP Enterprise Gateway.

debug

Provides additional logs to the system log.

 

For additional information, see “Advanced Configuration of PAM Files” in the “Integration Guide for Pluggable Authentication Modules (PAM)”, included with the download for the integration component.

Configuring PUSH authentication with PAM

Symantec VIP’s integration module is capable of authenticating via VIP’s PUSH method.  In VIP Enterprise Gateway, a validation server that supports “Access Challenge” will allow validation via PUSH.  In order to configure this, select “custom configuration” instead of Vendor “Unix/Linux” at the initial Validation Server configuration screen in VIP Enterprise Gateway:

Two methods are available here:

  • To have Enterprise Gateway perform username + password validation and PUSH validation, select:

    UserID – LDAP Password – Security Code
     
  • To have Enterprise Gateway only perform PUSH validation, select:

    UserID – Security Code

Section 2 Backround on the PAM subsystem

Contents

Understanding the PAM Subsystem

Advanced Concepts

Substacks

Includes

Custom actions in Linux

Arguments

Types of PAM module

Understanding the PAM Subsystem

PAM is the method used by multiple services on a *NIX system to centralize authentication and authorization logic.  System Administrators program how authentication and authorization should work in different circumstances for different services.  Each service calling PAM is governed by the associated PAM configuration file, centrally stored on most systems in /etc/pam.d/.  For instance: /etc/pam.d/sshd

It is important to know that any given PAM ruleset is processed from the top, down.  This will become important later.

Services configured to rely on PAM will call PAM in certain circumstances, such as when needing to authenticate a user.  PAM, in turn, interprets the administrator-configured ruleset that calls a series of modules.  These modules are called with a specific context (known equivalently as type or facility) that handles different aspects of interacting with the user, interacting with the system, or dynamically moving through the ruleset.

Each rule brings together the specific PAM module, the specific context it is called in (type/facility) and gives the administrator the ability to do different things depending upon the feedback from that module in a control statement.  One typical configuration line (or rule) of “sshd” might look like this:

account         required   pam_nologin.so

In the above rule, sshd is the service that called PAM to invoke this ruleset in this configuration file, pam_sepermit.so is the module that is called by the rule above, auth is the facility – the particular section of pam_nologin.so that is invoked, and required is the control statement – what to do with the results that pam_nologin.so passes back when it is done.

 

Each module is called with one of the types below. 

auth – Performs user authentication related tasks.

account – Performs user authorization related tasks.

password – Special handling for passwords.

session – Handles session initiation activities, if any.

Each module does different things with each of these types.  The module might interact with the user (to prompt the user for their username or password) or interact with the system (assigning user ids, launching a shell, etc.)  Modules might not implement all four of these – see Appendix B for tables depicting popular modules and what types they support.

All the rules for a given service and type together are generally referred to as a “stack” and are generally organized together in the configuration file.

A stack groups together common logic with the idea that a set of rules need to be executed together, such as when a user is attempting to switch user via the “su” command.

So, when sshd needs a user to reauthenticate a session, PAM will invoke the auth stack of the sshd PAM configuration file and execute the modules within that stack as the logic indicates.

Advanced Concepts

Substacks

PAM can collect advanced processing together into a substack so that multiple rulesets can refer to this same logic.  The entire processing of the substack is treated as a rule in the main flow of PAM processing, which can be important for setting up more complex logic.  For instance, many systems have a “system-auth” file that allows other services to process common logic.  Doing this abstracts complex logic that can be used in a variety of services and maintained separate from the service-specific configuration.

Several advanced notes: a substack can call a substack out to a depth of 16 (in Linux).  Each “layer” keeps its own state independent of the others (eventually, though, a substack will finish and then return a value to the layer it came from).

Includes

To save space in the main configuration file for any given service, generic groups of rules can be grouped into common rulesets and “brought in” to any given configuration file via the include keyword.  There are subtle shades of meaning between include and substack better explained elsewhere that articulate exactly how one vs. the other works.

Custom actions in Linux

The PAM module will exit with a specific return code that is vital to understand for the administrator when customizing PAM logic.  Linux, Solaris, AIX all differ when it comes to the finer details, covered below for Linux.  See Appendix A: Additional Resources and Guides for links to Solaris, AIX, and HP-UX PAM documentation.

By default, there are four control keywords that summarize common pairings between return values and actions:

required: [success=ok new_authtok_reqd=ok ignore=ignore default=bad]

requisite: [success=ok new_authtok_reqd=ok ignore=ignore default=die]

sufficient: [success=done new_authtok_reqd=done default=ignore]

optional: [success=ok new_authtok_reqd=ok default=ignore]

So the following two lines are equivalent:

account         required   pam_nologin.so

account         [success=ok new_authtok_reqd=ok ignore=ignore default=bad]     pam_nologin.so

The general format is [return value=action].  There are a lot of possible return values that could be used (see Appendix A: Additional Resources and Guides for links to more), but only a few “common” ones:

default

success

new_authtok_reqd

ignore

Links to additional return values are in Appendix A: Additional Resources and Guides.

For some modules, you may need to handle one of these return values with a custom action in order to fine-tune authentication logic.  There are seven action keywords.  The action keyword essentially allows/disallows continued processing in this substack (or to stop processing them) and whether they should leave the current PAM stack’s return value alone or update it.  A table provides some clarity, but the logic is still difficult (this summarizes a few concepts – interested readers are encouraged to read the source code):

 

Continue processing?

Update the return value?

bad

Yes

Yes

(mark as PAM_PERM_DENIED)

die

No

Yes
(mark as PAM_PERM_DENIED)

 

 

ok

 

 

Yes

If the current return value is success (PAM_SUCCESS), update it with this module’s value.

 

If the current return value is not successful, leave it alone.

 

 

done

Yes: If the current return value appears to be a failure

No: If the current return value was successful.

If the current return value is success (PAM_SUCCESS), update it with this module’s value.

 

If the current return value is not successful, leave it alone.

N

Yes

Skip next N modules in the current stack or substack

ignore

Yes

No

reset

Yes

Clear memory, stop processing this line, and continue processing.

Arguments

Modules can be called with arguments in some cases – see the definition for each module for what arguments it accepts.  For instance, “debug” is defined for most of them. 

Types of PAM module

PAM modules can be grouped depending upon their function.  Below is one attempt at categorizing the available modules and what facilities they support. 

 

Logic: These modules principally offer control logic when executing a given PAM configuration file.  Used in conjunction with actions to be taken on particular return values.

Modules: pam_succeed_if, pam_deny, pam_faildelay, pam_permit


General: These modules should be available for use in most situations.

Modules: pam_access, pam_debug, pam_echo, pam_env, pam_exec, pam_group, pam_limits, pam_listfile, pam_loginuid, pam_warn


Authentication: Provide various controls on authentication attempts such as making sure the user is or isn't root, requiring that the user be in the local database, allowing login based on timestamp, and more.

Modules: pam_cracklib, pam_localuser, pam_kerberos, pam_nologin, pam_pwhistory, pam_rootok, pam_securetty, pam_shells, pam_tally, pam_tally2, pam_time, pam_timestamp, pam_userdb, pam_wheel


Console: PAM modules that are principally useful when using an interactive (shell) session.

Modules: pam_filter, pam_issue, pam_laslog, pam_mkhomedir, pam_motd, pam_rhosts, pam_umask, pam_unix

 

Other: Other modules for special situations.

Modules: pam_ftp, pam_keyinit, mail, pam_namespace, pam_selinux, pam_xauth

Troubleshooting Tips

Is the user actually on the system?

Are the files present and in the right place?

Are the right ones present?

64-bit vs. 32-bit?

Unix vs. Linux

Check the logs:

VIP Enterprise Gateway (with the validation server set in “Debug” mode)

Local on-box logs (sometimes /var/log/secure, /var/log/messages, /var/adm/authlog, /var/log/auth.log)

Try using vsradiusclient_test to authenticate.

Can you reach the VIP Enterprise Gateway server from the target server?

 

Appendix A: Additional Resources and Guides

Symantec VIP Quick Start Guides

Symantec VIP Resources

Symantec VIP Integration Guides

 

Linux PAM links:

The Linux-PAM System Administrators’ Guide

PAM Modules

PAM Actions

The Linux-PAM Application Writers’ Guide

The Linux-PAM Module Writers’ Guide

PAM manual page (and return codes)

More PAM return codes

 

Non-Linux PAM links:

Oracle Solaris 11 – PAM Configuration

Pluggable Authentication Modules – AIX 6.1

PAM Administration - SUN

Appendix B: Tables

Linux PAM modules – Alphabetically

 

auth

account

password

session

access

Y

Y

Y

Y

cracklib

 

 

Y

 

debug

Y

Y

Y

Y

deny

Y

Y

Y

Y

echo

Y

Y

Y

Y

env

Y

 

 

Y

exec

Y

Y

Y

Y

faildelay

Y

 

 

 

filter

Y

Y

Y

Y

ftp

Y

 

 

 

group

Y

 

 

 

issue

Y

 

 

 

keyinit

 

 

 

Y

lastlog

Y

Y

 

Y

limits

 

 

 

Y

listfile

Y

Y

Y

Y

localuser

Y

Y

Y

Y

loginuid

 

 

 

Y

mail

Y

 

 

Y

mkhomedir

 

 

 

Y

motd

 

 

 

Y

namespace

 

 

 

Y

nologin

Y

Y

 

 

permit

Y

Y

Y

 

pwhistory

 

 

Y

 

rhosts

Y

 

 

 

rootok

Y

Y

Y

 

securetty

Y

 

 

 

selinux

 

 

 

Y

shells

Y

Y

 

 

succeed_if

Y

Y

Y

Y

tally

Y

Y

 

 

tally2

Y

Y

 

 

time

 

Y

 

 

timestamp

Y

 

 

Y

umask

 

 

 

Y

unix

Y

Y

Y

Y

userdb

Y

Y

 

 

warn

Y

Y

Y

Y

wheel

Y

Y

 

 

xauth

 

 

 

Y

 

Linux PAM modules – By Facility

 

auth

account

password

session

access

Y

Y

Y

Y

debug

Y

Y

Y

Y

deny

Y

Y

Y

Y

echo

Y

Y

Y

Y

exec

Y

Y

Y

Y

filter

Y

Y

Y

Y

listfile

Y

Y

Y

Y

localuser

Y

Y

Y

Y

succeed_if

Y

Y

Y

Y

unix

Y

Y

Y

Y

warn

Y

Y

Y

Y

permit

Y

Y

Y

 

rootok

Y

Y

Y

 

lastlog

Y

Y

 

Y

nologin

Y

Y

 

 

shells

Y

Y

 

 

tally

Y

Y

 

 

tally2

Y

Y

 

 

userdb

Y

Y

 

 

wheel

Y

Y

 

 

env

Y

 

 

Y

mail

Y

 

 

Y

timestamp

Y

 

 

Y

faildelay

Y

 

 

 

ftp

Y

 

 

 

group

Y

 

 

 

issue

Y

 

 

 

rhosts

Y

 

 

 

securetty

Y

 

 

 

time

 

Y

 

 

cracklib

 

 

Y

 

pwhistory

 

 

Y

 

keyinit

 

 

 

Y

limits

 

 

 

Y

loginuid

 

 

 

Y

mkhomedir

 

 

 

Y

motd

 

 

 

Y

namespace

 

 

 

Y

selinux

 

 

 

Y

umask

 

 

 

Y

xauth

 

 

 

Y

 

PAM Installer Bash Script

This bash script was tested on all the versions of Linux specified in this article. However, this script is not officially supported by Symantec support or Symantec development. By using this script the user assumes all responsibility and will take the precautions of testing the script in a non production environment prior to a full deployment.

You may download the bash script on the bottom of this article. 

For command line usage refer to Installing on Linux.

 

Attachments

symc_pam_install.zip get_app