How to preform a hard disk wipe using the Ghost utility called GDisk.
When reallocating hardware from one person to another, it is often important to ensure that none of the old data from the hard disk can be retrieved, even after deploying a new imaging to the computer.
The GDisk utility (one of the Ghost tools included with Deployment Solution 6.9 SP1 - Ghost Solution Suite 3.0) is a multipurpose disk management utility that includes a secure disk wiping feature. GDisk’s secure disk wiping feature wipes data according to the U.S. Department of Defense (DoD) 5220.22-M standard. According to this standard, the following group of operations is performed six times:
• All addressable locations on the hard disk are overwritten with 0x35.
• All addressable locations on the hard disk are overwritten with 0xCA.
• All addressable locations on the hard disk are overwritten with a pseudorandom character.
• All addressable locations on the hard disk are verified in hardware using the Verify Sectors command to the disk.
Running GDisk to Securely Wipe a Disk
GDisk can be run from a DOS (GDisk.exe), WinPE (GDisk32.exe or GDisk64.exe), or Linux (Gdisk) pre-boot operating system using the following syntax:
gdisk disk /diskwipe /dodwipe
The following table explains the GDisk command-line elements.
|gdisk||The Gdisk executable used, such as GDisk.exe (for DOS) or GDisk32.exe (for WinPE).|
|disk||The physical disk to be wiped. Replace disk with a number between 1 and 128.|
|/diskwipe||Instructs GDisk to perform a disk wipe.|
|/dodwipe||Instructs GDisk to perform the required wipes meeting the DoD standards.|
Example: gdisk.exe 1 /diskwipe /dodwipe
This command runs the DOS version of GDisk and wipes the first drive using the DoD standards.
Sample Symantec wipe disk jobs ships with Deployment Solution and can be found in the Samples job folder.