The Data Center Security (DCS) Certificate Utility
Article ID: 170379
Updated On:
Products
Issue/Introduction
You must use a Trusted Signed Certificate or regenerate the Self-Signed Certificates
Products supported
Symantec Data Center Security DCS 6.5
Symantec Data Center Security DCS 6.7
Symantec Data Center Security DCS 6.8
Symantec Embedded Security: Critical System Protection (SES:CSP) 6.5, 7.0 or Critical System Protection (CSP) 7.2.
Environment
DCS 6.5.x, 6.7.x, 6.8.x
SES:CSP 6.5, 7.0, 7.1
CSP 7.2
Resolution
The DCS Certificate Utility is used for:
- Creation of the Certificate Signing Requests needed for the umcserver.ssl, sss.ssl, server-cert.ssl and agent-cert.ssl keystores needed to issue Trusted Signed Certificates.
- Importing of the Trusted Signed Certificates to the DCS Keystores.
- Recreation of the self-signed certificates
Attached is the Utility and the Readme file.
Note: If DCS was installed using the IP Address, you must update the <DCS Installation Directory>\umc\umc.properties UMC_Server_IP field with the FQDN that was used with the DCS Certificate Utility.
Example of some umc.properties parameters:
UMC_SERVER_IP = dcs-esx6.samad2k8.com
UMC_SERVER_PORT = 8443
UMC_SERVER_SCHEME = https
UMC_SERVER_SERVICE = umcservices
UMC_SERVER_SERVICE_TOKEN_VALIDATION_API = /rest/v1.0/auth/token/validate
Note: DCS 6.9 is not supported at this time for this version of the utility
Additional Information
Depending on Windows Server version, it's OS will have either .net 3.0, .net 3.5, or .net 4.0
We have included the DCS_Cert_Utility_1.7.17.zip that has been complied for each of these three versions.
File name in this KB - 1596713545094__DCS67CertUtility-1.7.17.zip
DCS_Cert_Utility_1.7.17_net30.zip
DCS_Cert_Utility_1.7.17_net35.zip
DCS_Cert_Utility_1.7.17_net40.zip
Generally speaking, your Windows Server will contain the following .net versions
Server 2008 - .net 3.0 or .net 3.5
Server 2012 and up - .net 4.0
Attachments
Feedback
