Update sequence for vSphere 7.0 and its compatible VMware products
Article ID: 317899
Updated On:
Products
VMware vSphere ESXi
Issue/Introduction
This article only encompasses environments running vSphere and/or vCloud Suite 7.0 and VMware products compatible with vSphere 7.0.
In an environment with vSphere 7.0 and its compatible VMware products, perform the update sequence described in the Supported Update Sequence table.
Note: This article refers only to the latest versions of VMware products that are supported by vSphere 7.0 and its update sequence. For more information, see Upgrade path and Interoperability of VMware Products (70785).
Important:
In an environment with vSphere 7.0 and its compatible VMware products, perform the update sequence described in the Supported Update Sequence table.
Note: This article refers only to the latest versions of VMware products that are supported by vSphere 7.0 and its update sequence. For more information, see Upgrade path and Interoperability of VMware Products (70785).
Important:
When upgrading your vCenter Server when Horizon View is part of your environment, refer to the following resources:
Update sequence for Horizon 7.x and its compatible VMware products (78445)
Migration Recommendations and Restrictions for Horizon VDI Desktops (57368).
VMware Interoperability Matrices
Environment
VMware vSphere 7.0.x
Resolution
This table describes the upgrade path in which the vSphere 7.0 and its compatible VMware products must be updated:
Supported Update Sequence
| vRSLCM | vRLI | vROPs | vRNI | vRA | vADP-based Backup solution | VR | SRM | NSX-T | vCenter Server | ESXi | VMware Tools | Virtual Hardware | vSAN ODF/VMFS | vSAN File Services | |
| Seq. | 1 | ||||||||||||||
| 2 | 2 | ||||||||||||||
| 3 | |||||||||||||||
| 4 | |||||||||||||||
| 5 | |||||||||||||||
| 6 | 6 | ||||||||||||||
| 7 | |||||||||||||||
| 8 | |||||||||||||||
| 9 | |||||||||||||||
| 10 | |||||||||||||||
| 11 | |||||||||||||||
| 12 | |||||||||||||||
| 13 |
Note: If you need to update multiple products in your environment, start with updating the product with the lowest sequence number. After you update the product, update the product with the next sequence number. If a product is not present in your environment, update the subsequent product. If you need to update two products with the same sequence number, the order of update does not matter.
Feedback
Yes
No
Powered by
