Troubleshooting Network Performance Issues in a vSphere Environment

Products

• VMware vCenter Server
• VMware vSphere ESXi

Issue/Introduction

• Networking performance to and from the host and/or virtual machines is not optimal
• Network performance is slow

Environment

VMware vSphere ESXi 6.x
VMware vSphere ESXi 7.x
VMware vSphere ESXi 8.x

Cause

Network problems can have several causes: 

• Virtual machine network resource shares are too few.
• Network packet size is too large, which results in high network latency. Use the VMware AppSpeed performance monitoring application or a third-party application to check network latency.
• Network packet size is too small, which increases the demand for the CPU resources needed for processing each packet. Host CPU, or possibly virtual machine CPU, resources are not enough to handle the load.

Resolution

 

There are many ESXi host components that can contribute to network performance.

Validate that each troubleshooting step below is true for the environment. The steps provide instructions or a link to a document, for validating the step and taking corrective action as necessary. The steps are ordered in the most appropriate sequence to isolate the issue and identify the proper resolution. Please do not skip a step.

1. Verify that the latest version of VMware Tools is installed in the virtual machines. For more information, see below links
   • Verifying a VMware Tools build version and Overview of VMware Tools.
   • VMware Tools versions included with VMware ESXi 6.x, 7.x, and 8.x
     
     
2. VMware recommends using multiple NICs on the associated virtual switch to increase the overall network capacity for portgroups that contain many virtual machines or several virtual machines that are very active on the network. 
   • NIC teaming in ESXi and ESX
   • VMware vSphere Documentation: NIC Teaming and Failover
     
     
3. Verify the speed and duplex settings of the installed network adapters.
   • Configuring the speed and duplex of an ESX / ESXi host network adapter.
     
     
4. Verify that the portgroup and virtual switch are not configured for promiscuous mode. 
   • Configuring promiscuous mode on a virtual switch or portgroup.
   • VMware vSphere Documentation: NIC Teaming and Failover
   • Interpreting esxtop statistics (1008205)
   • Troubleshooting ESX/ESXi virtual machine performance issues (1008201)
   • vSphere Documentation: Performance Monitoring and Analysis(Search for CPU and network-related best practices).
     
     
5. Verify the appropriate network driver for the virtual machine based on environmental needs. 
   • Choosing a network adapter for your virtual machine.
   • VMware vSphere Documentation: Virtual Machine Networking (Search for "Virtual Network Adapters" or "NIC Types")
   • VMXNET3 virtual network adapter performance issues (2012674)