Distributed Load Balancer Service Status Down Alarm
book
Article ID: 372180
calendar_today
Updated On:
Products
VMware NSXVMware vSphere ESXi
Issue/Introduction
Title: Alarm for Distributed Load Balancer Service Status Down
Event ID: load_balancer.dlb_status_down
Alarm Description:
Purpose: To inform users that the distributed load balancer service is down.
Impact: All the traffic to this distributed load balancer is broken.
Environment
VMware NSX-T Datacenter VMware NSX
Cause
There is no ready LSP for the distributed load balancer on all ESXi hosts.
Resolution
Steps to resolve For 3.1.2 and higher
Recommendation Action:
On ESXi host node, invoke the NSX CLI command `get load-balancer <lb-uuid> status`.
If 'Conflict LSP' is reported, check whether this LSP is attached to other load balancer service. Check whether this conflict is acceptable.
If 'Not Ready LSP' is reported, check the status of this LSP by invoking NSX CLI command `get logical-switch-port status`.
Note: Enable DFW for DLB workloads. Disabling DFW either globally or through the DFW Exclusion List will cause an outage on DLB workloads. Reference Documentation: Distributed Load Balancer