What releases of APM TIM, MTP/VMTP, and ADA are compatible?
Article ID: 9690
Updated On:
Products
Issue/Introduction
To date, there is no official list of all compatible APM TIM, ADA and MTP releases. To offset this gap, this unofficial equivalent was created. References are provided whenever possible. Note that for APM 10 and onward, the compatibility guides/databases list the corresponding compatible MTP releases.
For ADA-MTP release compatibility, the information was pulled out of the ADA release notes and other sources. ADA releases explicitly supported are underlined. However, the ADA-MTP information is presented AS-IS and may no longer be current.
Environment
Resolution
1. Operating Systems
The table below lists the corresponding MTP, ADA, and OS versions:
The recommended release is underlined. Note that some MTP releases have been announced as EOS.
|
MTP/VMTP Version |
CentOS Version |
ADA/SuperAgent Version |
EOS Date (Source #20) |
|
2.2 |
CentOS 5.5 64-bit Linux |
ADA Super Agent 9.1. But should also work with SA 9.0 and 9.0 sp 1 (not recommended). |
10/3/2018 |
|
9.2 |
CentOS 5.7 64-bit Linux |
ADA Super Agent 9.1, ADA 9.2 and 9.3. Not Compatible with ADA 10. |
10/3/2018 |
|
10.0 |
CentOS 5.9 64-bit Linux |
ADA 9.2, 9.3, 10, 10.4 |
10/3/2018 |
|
10.1 |
CentOS 5.11 64-bit Linux |
ADA 9.3, 10.0, 10.1 |
10/3/2018 |
|
10.2 |
CentOS 5.11 64-bit Linux |
ADA 10.0, 10.1, 10.2, 10.4 |
10/3/2018 |
|
10.3 |
CentOS 6.6 64-bit Linux |
ADA 10.0, 10.1, 10.2,10.3, 10.4 |
10/3/2018 |
|
10.4 |
CentOS 6.7 64 bit Linux |
ADA 10.0, 10.1, 10.2,10.3, 10.4 |
10/3/2018 |
|
10.5 |
CentOS 6.7 64 bit Linux |
ADA 10.5, 10.6, 11.0 |
10/3/2018 |
|
10.6 |
CentOS 6.7 64 bit Linux (VMTP) |
ADA 10.5, 10.6, 11.0 |
NA |
|
11.0 |
CentOS 6.7 64 bit Linux (VMTP) |
ADA 11.0 |
NA |
|
11.02 |
CentOS 6.6, 6.7, 6.8, 6.9 64 bit Linux (VMTP) |
ADA 11.0 |
NA |
The table below lists the corresponding CentOS and MTP versions.
Important Note: There is no supported upgrade path from vMTP 10.6 to 11.0.1.
|
APM Version |
MTP Version |
Source Number |
|
9.0 |
None |
1 |
|
9.1 |
2.2,9.2 |
8, 9,10 |
|
9.1.0.1 |
2.2 |
9 |
|
9.1.1.1 |
2.2, 9.2 |
9 |
|
9.1.2 |
2.2 |
9 |
|
9.1.4 |
2.2, 9.2 |
9 |
|
9.1.6 |
9.2 |
9 |
|
9.5 |
2.2, 9.2 |
9 |
|
9.5.1 |
10 |
2 |
|
9.5.2 |
10 |
2 |
|
9.5.3 |
10 |
2 |
|
9.6 |
9.2, 10 |
2,7 |
|
9.7 |
9.2,10.0,10.1, 10.2 |
3, 6 (Workaround), 11 |
|
10.0 |
10.1 , 10.2 |
6 (Workaround), 12 |
|
10.1 |
10.1 , 10.2 , 10.3 (with APM 10.1 Hotfix) 10.4 (with APM 10.1 Hotfix) 10.5 (with APM 10.1 Hotfix) 10.6 (See TEC1084614.) |
6 (Workaround), 13, 16, 18
|
|
10.2 |
10.1 , 10.2 10.3 (with APM 10.2 Hotfix) 10.4 (with APM 10.2 Hotfix) 10.5 (with APM 10.2 Hotfix) |
6 (Workaround), 17 |
|
10.3 |
10.1 , 10.2, 10.3-10.5 (with workaround) 10.6 (See TEC1084614.) |
6 (Workaround), 16, 18
|
|
10.5/10.5.1/10.5.2/10.7 (This should work with any 10.5.1/10.5.2 hotfix.) |
10.1, 10.2, 10.3, 10.4, 10.5 VMTP 10.6, VMTP 11.02 (tested with APM 10.5.1/10.5.2/10.7 only) |
5, 14, 15, 16, 19, 21 |
Notes:
1. The MTP 10.0 Release Notes says that it support APM 9.1 & 9.5. But this does not appear to be the case.
2. The MTP 10.0/10.1 Compatibility Guide explicitly says that MTP 2.2 is not supported with these releases.
3. Currently, no APM release supports VMTP 11.0.
. 4. A Non-VMTP TIM 10.7 supports RHEL/CentOS 7.3 See https://comm.support.ca.com/kb/installing-apm-tim-for-rhel-73-environment/KB000115860 & https://comm.support.ca.com/kb/ca-apm-tim-support-under-red-hat-enterprise-linux-7-x/KB000115945 for details.
Additional Information
1. MTP Support Guide 10.0 Edition (Internal)
2. https://communities.ca.com/docs/DOC-231149747 -- Tech Tip - CEM TIM that are compatible with MTP 10
4. https://communities.ca.com/thread/241742275 -- MTP 10.3 and TIM Compatibility
5. http://www.ca.com/us/support/ca-support-online/product-content/knowledgebase-articles/tec1643212.aspx -- MTP 10.3 and TIM Compatibility
*.rpm" during the APM 9.7.x TIM installation on MTP. APM 9.7/10 TIM 10.1/10.2
on the MTP Appliance (CA ADA Multi-Port Monitor).
8. MTP 2.2 Release Notes
9. Internal Email on MTP-TIM Compatibility.
10. MTP 9.2 Release Notes
running on the MTP Appliance (CA ADA Multi-Port Monitor).
12. APM 10.0 Compatibility Guide (Look in Integrations and Other Extensions Tab.)
13. APM 10.1 Compatibility Guide (Look in Integrations and Other Extensions Tab.)
19. APM Compatibility Database -- http://pcm.ca.com/?op=Search&solution=grp-APM&Submit=Select+solution
20. End of Service Announcement for CA Application Delivery Analysis Multi-Port Monitor r2.1, 2.2, 9.2, 10.0, 10.0 SP1, 10.1, 10.2, 10.3, 10.4 and 10.5.
21. Is VMTP 11.02 compatible with APM 10.5.2? TEC1866663
Feedback
