"RC 32 EXECUTING PANEXEC" and "ERROR AT LABEL DOPX, CK PANESRL, SETUP, OR FOR MISSING FILES" message
Article ID: 4376
Updated On:
Products
Issue/Introduction
When we tried to output the report from Panexec ISPF panel, we received the "RC 32 EXECUTING PANEXEC" and "ERROR AT LABEL DOPX, CK PANESRL, SETUP, OR FOR MISSING FILES" message.
1. Select "3 GENERATE CA-PANEXEC REPORTS"
---------------------------- CA-PANEXEC/ISPF ----------------- CA-PANEXEC/ISPF.
OPTION ===> 3
VERSION - 5.39606
0 PERFORM CA-PANEXEC USER COMMANDS FROM AN MSL
1 PERFORM CA-PANEXEC USER COMMANDS
2 PERFORM CA-PANEXEC MANAGEMENT COMMANDS
3 GENERATE CA-PANEXEC REPORTS
4 SETUP CA-PANEXEC REQUIRED FILES
5 BUILD/EXECUTE CA-PANEXEC COMMAND STREAM(S)
C DISPLAY SUMMARY OF CA-PANEXEC CHANGES FOR THIS RELEASE
T TUTORIAL FOR CA-PANEXEC
X EXIT CA-PANEXEC
ENTER END COMMAND TO TERMINATE CA-PANEXEC/ISPF
*********************************************************************
* COPYRIGHT (C) 1996 COMPUTER ASSOCIATES INTERNATIONAL, INC. *
* -- ALL RIGHTS RESERVED WORLDWIDE. -- *
*********************************************************************
2. Input the Panexec library name and select the report number. (For long message, push PF1 key)
----------------------------- CA-PANEXEC REPORTS ----- RC 32 EXECUTING PANEXEC
OPTION ===>
ENTER CA-PANEXEC REPORT: USER-ID :user01
1 PE101 5 PE105 9 PE109 D PE113 H PE117 L PE129 P PE133
2 PE102 6 PE106 A PE110 E PE114 I PE118 M PE130 Q PE134
3 PE103 7 PE107 B PE111 F PE115 J PE119 N PE131 R PE106V
4 PE104 8 PE108 C PE112 G PE116 K PE127 O PE132
CA-PANEXEC LIBRARY ==> 'PUBLIC.PANEXEC.R539606.PANESRL'
CA-PANEXEC SECURITY:
NEED CODES ==> N (Y/N)
ELEMENT NAME SELECTION CRITERIA:
SELECT ALL ==> N (Y/N, Y= SELECTION CRITERIA WILL BE IGNORED)
GROUP ==> (NAME OF GROUP)
ELEMENT ==> (NAME OF ELEMENT)
TYPE ==> (OBJECT, EXEC, SEE HELP FIELDS FOR VALID TYPES)
STATUS ==> (P=PRODUCTION, T=TEST DEFAULT=T)
MODE ==> (A=ACTIVE, D=DISABLED, I=INACTIVE DEFAULT=A)
PRESS ENTER KEY TO PROCESS; ENTER END COMMAND TO TERMINATE.
+--------------------------------------------------------------+
| ERROR AT LABEL DOPX, CK PANESRL, SETPU, OR FOR MISSING FILES |
+--------------------------------------------------------------+
Environment
Cause
You have a possibility of having made a mistake in the setup of PANESRL library. If PANESRL library does not have the "$PROCLIB.REPORTS/PCONTROL" element, Panexec can not output the report and this error occurs.
Resolution
Please check the PANESRL DATASET ==> of the "4 SETUP CA-PANEXEC REQUIRED FILES" panel and please correct the setting.
------------------------------ CA-PANEXEC SETUP -------------- CA-PANEXEC/ISPF.
OPTION ===>
USER-ID :user01
CA-PANEXEC SYSTEM LIBRARY:
PANESRL DATASET ==> PUBLIC.PANEXEC.R539606.PANESRL
CONCATENATION ==>
CA-PANEXEC OUTPUT PRINT FILES:
PANPRINT DATASET ==> TEMPFILE
LISTING DATASET ==> TEMPFILE
SYSTEM INFORMATION:
DOES DFHSMS CATALOG FILES CREATED WITH USERID ==> N (Y/N)
UNIT NAMES TO USE FOR ALLOCATIONS:
UNIT FOR WORKFILES ==> VIO ( VIO, SYSDA, DISK ETC..)
UNIT FOR SORTWORKS ==> SYSDA ( VIO, SYSDA, DISK ETC..)
DISPLAY CA-PANEXEC COMMANDS AND MESSAGES IN OUTPUT ==> N (Y/N)
ACTIVATE CONTROL SYMLIST CONLIST LIST -IN CLIST ==> N (Y/N)
PRESS ENTER KEY TO PROCESS; ENTER END COMMAND TO TERMINATE.
Additional Information
You can output the report by batch job. The following is the sample jcl.
// JOB
//STEP01 EXEC PGM=PANEXEC,REGION=4096K
//STEPLIB DD DSN=PUBLIC.PANEXEC.R539606.PANESRL,DISP=SHR
// DD DSN=PUBLIC.PANEXEC.R539606.CAILIB,DISP=SHR
//PANESRL DD DSN=PUBLIC.PANEXEC.R539606.PANESRL,DISP=SHR
//PANELIB DD DSN=PUBLIC.PANEXEC.PEXLIB,DISP=SHR
//PANPRINT DD SYSOUT=*
//SYSOUT DD SYSOUT=*
//SYSPUNCH DD SYSOUT=*
//* FOR PANETRIEVE
//FILEA DD UNIT=SYSDA,SPACE=(CYL,(1,1))
//FILEB DD UNIT=SYSDA,SPACE=(CYL,(1,1))
//EZTIN DD UNIT=SYSDA,SPACE=(CYL,(1,1))
//PANEIN DD *
%INPUT REPORTS,*,PEnnn
/*
//
Feedback
