Error: "Virtual disks with same UUID should not be assigned to a VM" when adding a disk to a virtual machine
Article ID: 341653
Updated On:
Products
VMware vSphere ESXi
Issue/Introduction
Symptoms:
- If the virtual machine is running and changes are made to the virtual machine settings, there may be a message similar to:
[msg.disk.duplicateUUID] Virtual disks "/vmfs/volumes/<DatastoreName>/<VMName>/<vDiskName.vmdk>" and "/vmfs/volumes/<DatastoreName>/<VMName>/<vDiskName.vmdk>" have the same UUID ## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##. Virtual disks with same UUID should not be assigned to a VM since this can lead to problems when the guest boots. Please make sure virtual disks have unique UUIDs. Do you want to continue?
Note: The complete message is visible in the vmware.log file of the virtual machine.
- If the virtual machine is running and answered no, the virtual disk is not added to the virtual machine and the virtual disk will be locked.
Environment
VMware vSphere ESXi 8.x
VMware vSphere ESXi 7.x
VMware vSphere ESXi 6.x
Cause
It is not possible to add a disk to a virtual machine that currently has a disk with the same UUID (Universally Unique Identifier).
Resolution
To create a new UUID for the disk:
1. Power off the virtual machine to unlock the disk.
2. To get the virtual disk UUID, run the following command:
$ vmkfstools -J getuuid <vmname>.vmdk
Example:
$ vmkfstools -J getuuid /vmfs/volumes/datastore/VM/vm.
UUID is ## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##
3. To set or modify the UUID, run this command:
$ vmkfstools -J setuuid <vmname>.vmdk
Example:
$ vmkfstools -J setuuid /vmfs/volumes/datastore/VM/vm.
UUID is ## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##
A new UUID is returned after the command executes.
- Alternatively when cloning a vmdk, a new disk will generally have a different UUID.
Additional Information
Feedback
Yes
No
Powered by
