NewMM.pl script doesn't convert model types

Products

• CA Spectrum

Issue/Introduction

After upgrading Spectrum, the user is seeing many "Different Model Type" minor alarms. User has run the $SPECROOT/Install-Tools/NewMM.pl script but no models are converted and the "Different Model Type" minor alarms remain.

The following blank DBConv related messages are seen in the NewMM log.

Enterprise DBconv v6.15

(c) Copyright 2002 CA, Inc.

Enterprise DBconv v6.15

(c) Copyright 2002 CA, Inc.

Enterprise DBconv v6.15

(c) Copyright 2002 CA, Inc.

Enterprise DBconv v6.15

(c) Copyright 2002 CA, Inc.

 

 

 

Environment

Release:
Component: SPCDIS

Cause

When the following is prompted by NewMM.pl script, the decimal value of the Landscape Handle was entered.

Enter SpectroServer Landscape Handle (Must be in hex):

Resolution

When prompted for the Landscape Handle, you must enter the hex value not the decimal value.

Additional Information

Please reference the "Upgrading Models" section of the documentation for more information.

Please use the following directions to find the hex value of the Landscape handle:

1. Log into the SpectroSERVER system as the user that owns the Spectrum installation

2. If on Windows, start a bash shell by running "bash -login"

3. cd to the $SPECROOT/SS directory and run the following command:

../SS-Tools/lh_set

4. The output will be similar to the following showing both the decimal and hex value of the Landscape handle:

../SS-Tools/lh_set
SS database landscape handle is 64 (0x1000000)
DDM database landscape handle is 64 (0x1000000)