CA SYSVIEW : PTF SO14533適用時にGIM54502Eメッセージが表示される

book

Article ID: 203996

calendar_today

Updated On:

Products

CA SYSVIEW Performance Management

Issue/Introduction

PTF SO14533適用時に以下のメッセージが出力されて適用出来ません。対応方法を教えてください。

 

 GIM54502E ** ALLOCATION FAILED FOR CNM4APSC BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN TARGET    
              ZONE CAIT.  
                                                                                         
 GIM28307E ** ALLOCATION FAILED FOR CNM4APSC, WHICH IS REQUIRED IN ORDER TO PROCESS ELEMENT GSVOARGS IN SYSMOD SO14533.  
 GIM54502E ** ALLOCATION FAILED FOR CNM4ASAM BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN TARGET    
              ZONE CAIT.                                                                                                 
 GIM28307E ** ALLOCATION FAILED FOR CNM4ASAM, WHICH IS REQUIRED IN ORDER TO PROCESS ELEMENT GSVOCCSS IN SYSMOD SO14533.  
 GIM54502E ** ALLOCATION FAILED FOR CNM4APPS BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN TARGET    
              ZONE CAIT.                                                                                                 
 GIM28307E ** ALLOCATION FAILED FOR CNM4APPS, WHICH IS REQUIRED IN ORDER TO PROCESS ELEMENT GSVOSJAR IN SYSMOD SO14533. 

Environment

Release : r16.0

OS : z/OS

Resolution

PTF SO14533 で提供される以下のJCLをカスタマイズして実行してください。

PTF適用に必要なDDDEFが追加されます。

 

//JOBCARD JOB (00000000),CLASS=A,MSGCLASS=A,REGION=0M 
//*
// EXPORT SYMLIST=*
//*
//*===================================================================*
//* Sample JCL to add new DDDEF's to the SMP/E target zone for: *
//* *
//* CNM4APPS *
//* CNM4APSC *
//* CNM4ASAM *
//* *
//*===================================================================*
//* *
//* 1. Set SMPEHLQ to the SMP/E high-level qualifier used for *
//* product installation. *
//* *
// SET SMPEHLQ='smpehlq'
//* *
//* 2. Set PATHPFX to the USS directory path prefix used for *
//* product installation. If you're not sure what the path *
//* prefix was, query the CNM4BJAR DDDEF in the target zone. *
//* The path prefix will be everything preceding /sysview. *
//* If the path contains more than one /sysview sub-directory, *
//* then path prefix will be everything preceding the last *
//* occurrence of /sysview. *
//* *
//* It your PATHPFX is longer than 37 bytes, the path name *
//* will need to span multiple lines in the DDDEF step. The *
//* resolved path name should extend up to column 72, and be *
//* continued in column 1 of the following line. *
//* *
//* 1 2 3 *
//* ....5....0....5....0....5....0....5.. *
// SET PATHPFX='/cai'
//* *
//* 3. Set SMPETZ to the SMP/E target zone name used for *
//* product installation. *
//* *
// SET SMPETZ='CAIT'
//* *
//* Note: If the VERIFY step fails, it could be that zFS file *
//* system created during product installation is no longer *
//* mounted, or the file system is not accessible from the *
//* system that this job ran on. *
//* *
//*-------------------------------------------------------------------*
//*
//*===================================================================*
//* Verify the file system is mounted *
//*===================================================================*
//VERIFY EXEC PGM=BPXBATCH
//STDERR DD SYSOUT=*
//STDOUT DD SYSOUT=*
//STDPARM DD *,SYMBOLS=EXECSYS
SH cd &PATHPFX/sysview/cnm4g00;
cd CNM4BJAR;
/*
//*===================================================================*
//* Create the USS directories *
//*===================================================================*
//CR8DIR EXEC PGM=BPXBATCH,COND=(0,NE)
//STDERR DD SYSOUT=*
//STDOUT DD SYSOUT=*
//STDPARM DD *,SYMBOLS=EXECSYS
SH umask 0002;
cd &PATHPFX/sysview/cnm4g00;
mkdir -p -m 775 apps/CA;
mkdir -p -m 775 apps/config/CA;
mkdir -p -m 775 apps/samples/CA
/*
//*===================================================================*
//* Add DDDEF's in the target zone *
//*===================================================================*
//DDDEF EXEC PGM=GIMSMP,COND=(0,NE)
//SMPCSI DD DISP=SHR,DSN=&SMPEHLQ..CSI
//SMPRPT DD SYSOUT=*
//SMPOUT DD SYSOUT=*
//SMPCNTL DD *,SYMBOLS=EXECSYS
SET BOUNDARY(&SMPETZ) .
UCLIN .
ADD DDDEF(CNM4APPS)
PATH(
'&PATHPFX/sysview/cnm4g00/apps/CA/'
) .
ADD DDDEF(CNM4APSC)
PATH(
'&PATHPFX/sysview/cnm4g00/apps/config/CA/'
) .
ADD DDDEF(CNM4ASAM)
PATH(
'&PATHPFX/sysview/cnm4g00/apps/samples/CA/'
) .
ENDUCL.
/*

Additional Information

Old Japanese Knowledge document ID: JTEC002965

 

Related Article Id : 197967

CAメインフレーム製品のFAQ一覧表です。

各製品のFAQ一覧表にリンクされています。

JTEC002323:CA Common services とCA90SのFAQ一覧表

JTEC002320:CA JCLCheck FAQ一覧表

JTEC002324:CA 1 FAQ一覧表

JTEC002350:CA 7 FAQ一覧表

JTEC002351:CA 11 FAQ一覧表

JTEC002319:CA JMR FAQ一覧表

JTEC002322:CA SMR FAQ一覧表

JTEC002737:CA Gen FAQ一覧表

JTEC002337 : CA SYSVIEW FAQ一覧表

JTEC002336 : CA OPS/MVS FAQ⼀覧表

JTEC002885 : CA IMSTOOLs FAQ⼀覧表

JTEC002886 : CA JARS for z/OS FAQ⼀覧表

CA Top Secret FAQ一覧表

CA Top Secret Option for DB2 FAQ一覧表

CA Datacom/AD FAQ一覧表

CA Datacom/AD FAQ一覧表