How To Import Preboot Operating Systems Into Ghost Standard Tools 3.x
search cancel

How To Import Preboot Operating Systems Into Ghost Standard Tools 3.x

book

Article ID: 178835

calendar_today

Updated On:

Products

Ghost Solution Suite

Issue/Introduction

 How to import Windows ADK into Ghost Standard Tools 3.x

Resolution

Imaging a hard drive usually requires that the computer is booted to an "Automation Preboot Environment" rather than the "Production" Windows that you are trying to image. Windows PE 10 is a suitable Automation Preboot operating system for almost every circumstance. This tutorial will show you how to import a Windows Preboot Operating system into Ghost Standard Tools 3.x. 

Please note that this is for Ghost Solution Suite. If you are using Ghost Solution Suite console installation the instructions are in How To Import Windows Preboot Operating Systems Into Ghost Solution Suite 3.X (Console Installation)

1. Download the Windows 10 ADK . Install as directed. When asked for features to install, these two are the only ones we require:

 

NOTE: Windows 11 ADK can also be used.

NOTE: As of Windows 10 ADK build 1809 the ADK has been split by Microsoft into 2 files, both files will need to be downloaded and installed for it to work this includes:

  • ADK for Windows 10 ( install the Assessment and Deployment Kit option only)
  • Windows PE add-on for ADK

 

2. Browse to C:\Program Files (x86)\Symantec\Ghost\bootwiz (or to the bootwiz folder in the location you chose to install to, if you chose an alternate install location). Double-click bootwiz.exe.

3. The Install Pre-Boot Operating Systems wizard will appear (if no pre-boot operating system is already present). If the wizard does not appear automatically click Tools -> Install Pre-Boot Operating Systems 

4. Click "WinPE 10.0 x86". Click the radio button for "Pre-installed WAIK"
For Ghost Standard Tools 3.0 and 3.1 browse to C:\Program Files (x86)\Windows Kits\10
For Ghost Standard Tools 3.2 browse to C:\Program Files (x86)\Windows Kits\

Click Next

 

5. It will take a couple minutes to completely import this. After it completes, you will see the following screen. Click Finish.

6. The following pop-up will then appear. Click Cancel.

7. Repeat the same process, this time importing WinPE 10 X64

8. Select "WinPE 10.0 x64". Click the radio button for "Pre-installed ADK"

For Ghost Standard Tools 3.0 and 3.1 browse to C:\Program Files (x86)\Windows Kits\10
For Ghost standard Tools 3.2 browse to C:\Program Files (x86)\Windows Kits\

Click Next.

9. After that completes, click Finish. You are done.

You may now create WinPE 10 boot media (Creating Boot Media For Legacy Ghostcasting With Ghost Solution Suite 3.x)