Minimum release and maint levels for IBM z13 and z14 processors - Easytrieve
Article ID: 92971
Updated On:
Products
PanAudit Plus
Easytrieve Report Generator
PAN/SQL
Issue/Introduction
We plan to upgrade our production processor to a z13, and another machine to z14 as Disaster Recovery machine.
We need to know if there are any minimum release, maintenance, or PTF's that we need to be at to run on either of those 2 machines.
We need to know if there are any minimum release, maintenance, or PTF's that we need to be at to run on either of those 2 machines.
Environment
Release:
Component: EZTPLS
Component: EZTPLS
Resolution
CA-EASYTRIEVE v6.4, 11.5 and 11.6 have been certified and are compatible with z13/z13s and z14 processors.
However, the QO72665 is required for the Easytrieve Plus R6.4/G0311 because this PTF is required for the z9 or upper processors.
However, the QO72665 is required for the Easytrieve Plus R6.4/G0311 because this PTF is required for the z9 or upper processors.
Additional Information
New LMP keys will be required for the new Znn cpu.
See attached link to CA Easytrieve Compatibility -> https://support.ca.com/phpdocs/0/MSPSaccount/COMPAT/EZT.HTML
See attached link to IBM zEnterprise Compatibility Matrix -> https://support.ca.com/phpdocs/0/MSPSaccount/COMPAT/IBM_hardware.HTML
See attached link to CA Easytrieve Compatibility -> https://support.ca.com/phpdocs/0/MSPSaccount/COMPAT/EZT.HTML
See attached link to IBM zEnterprise Compatibility Matrix -> https://support.ca.com/phpdocs/0/MSPSaccount/COMPAT/IBM_hardware.HTML
Feedback
Yes
No
Powered by
