Non-MSM SMP Install failure

Products

• Datacom
• DATACOM - AD
• CIS
• COMMON SERVICES FOR Z/OS
• 90S SERVICES
• DATABASE MANAGEMENT SOLUTIONS FOR DB2 FOR Z/OS
• COMMON PRODUCT SERVICES COMPONENT
• Common Services
• CA ECOMETER SERVER COMPONENT FOC
• Easytrieve Report Generator for Common Services
• INFOCAI MAINTENANCE
• IPC
• UNICENTER JCLCHECK COMMON COMPONENT
• Mainframe VM Product Manager
• CHORUS SOFTWARE MANAGER
• CA ON DEMAND PORTAL
• CA Service Desk Manager - Unified Self Service
• PAM CLIENT FOR LINUX ON MAINFRAME
• MAINFRAME CONNECTOR FOR LINUX ON MAINFRAME
• GRAPHICAL MANAGEMENT INTERFACE
• WEB ADMINISTRATOR FOR TOP SECRET
• Xpertware

Issue/Introduction

I've reloaded and double checked my parms thus far. However the standard install job fails -- IPC4RECD. It should be noted that the user doesn't control the DCB information for SYS3.IPC15.D2018001.TMP.CAVQF10.F2 and CA has instructed SMPE to define these temp datasets as (NEW,DELETE,DELETE). This appears to be a defect in the install process. 


IEBCOPY MESSAGES AND CONTROL STATEMENTS PAGE 1 
IEB1135I IEBCOPY FMID HDZ2210 SERVICE LEVEL UA83177 DATED 20161026 DFSMS 02.02.00 z/OS 02.02.00 HBB77A0 CPU 2828 
IEB1035I IPC4RECD RCVBD 15:04:36 FRI 08 DEC 2017 PARM='' 
 COPY OUTDD=SMPTLIB,INDD=SMP00001 SMPTLIB - 2 CAVQF10 
S M=((CAVQF10A,,R),(CAVQF10D,,R),(CAVQF10P,,R)) CAVQF10 
IEB1013I COPYING FROM PDSE INDD=SMP00001 VOL=SSYS21 DSN=SYS3.IPC15.D2018001.CAI.CAVQF10.F2 
IEB1014I TO PDSE OUTDD=SMPTLIB VOL=SSYS21 DSN=SYS3.IPC15.D2018001.TMP.CAVQF10.F2 
IGW01513T RECFM INCOMPATIBLE -- INPUT RECFM = VB OUTPUT RECFM = FB 
IGW01550I 0 OF 3 SPECIFIED MEMBERS WERE COPIED 
IEB1130E A TERMINATING MESSAGE FROM FAMS PROCESSING APPEARS ABOVE -- DIAGNOSTIC INFORMATION IS X'28060000' 
IEB151I JOB HAS TERMINATED WITH ERROR(S) 
IEB147I END OF JOB - 8 WAS HIGHEST SEVERITY CODE 

and 
IEBCOPY MESSAGES AND CONTROL STATEMENTS PAGE 1 
IEB1135I IEBCOPY FMID HDZ2210 SERVICE LEVEL UA83177 DATED 20161026 DFSMS 02.02.00 z/OS 02.02.00 HBB77A0 CPU 2828 
IEB1035I IPC4RECD RCVBD 15:04:37 FRI 08 DEC 2017 PARM='CMWA=256K,SPCLCMOD' 
 COPYMOD OUTDD=SMPTLIB,INDD=SMP00001 SMPTLIB - 2 CAVQF15 
S M=((ICVAANF,,R),(ICVAL,,R),(ICVAS,,R),(ICVAVAC,,R),(ICVAVRV,,R)) CAVQF15 
S M=((ICVBACL,,R),(ICVBG,,R),(ICVBGUUC,,R),(ICVBP,,R)) CAVQF15 
S M=((ICVBPDDC,,R),(ICVBPLLC,,R),(ICVBPWWC,,R),(ICVBS,,R)) CAVQF15 
<snip> 
S M=((VLTSRM65,,R),(VLTSWM65,,R)) CAVQF15 
IEB1013I COPYING FROM PDSE INDD=SMP00001 VOL=SSYS21 DSN=SYS3.IPC15.D2018001.CAI.CAVQF15.F2 
IEB1014I TO PDSE OUTDD=SMPTLIB VOL=SSYS21 DSN=SYS3.IPC15.D2018001.TMP.CAVQF15.F2 
IGW01513T RECFM INCOMPATIBLE -- INPUT RECFM = U OUTPUT RECFM = FB 
IGW01550I 0 OF 111 SPECIFIED MEMBERS WERE COPIED 
IEB1130E A TERMINATING MESSAGE FROM FAMS PROCESSING APPEARS ABOVE -- DIAGNOSTIC INFORMATION IS X'28060000' 
IEB151I JOB HAS TERMINATED WITH ERROR(S) 
IEB147I END OF JOB - 8 WAS HIGHEST SEVERITY CODE 

Other temp datasets function properly. 
IEBCOPY MESSAGES AND CONTROL STATEMENTS PAGE 1 
IEB1135I IEBCOPY FMID HDZ2210 SERVICE LEVEL UA83177 DATED 20161026 DFSMS 02.02.00 z/OS 02.02.00 HBB77A0 CPU 2828 
IEB1035I IPC4RECD RCVBD 15:04:36 FRI 08 DEC 2017 PARM='' 
 COPY OUTDD=SMPTLIB,INDD=SMP00001 SMPTLIB - 1 CAVQF15 
S M=((VQ15CSD,,R),(VQ15CSDT,,R),(VQ15FCT,,R)) CAVQF15 
IEB1013I COPYING FROM PDSE INDD=SMP00001 VOL=SSYS20 DSN=SYS3.IPC15.D2018001.CAI.CAVQF15.F1 
IEB1014I TO PDSE OUTDD=SMPTLIB VOL=SSYS20 DSN=SYS3.IPC15.D2018001.TMP.CAVQF15.F1 
IGW01551I MEMBER VQ15CSD HAS BEEN COPIED 
IGW01551I MEMBER VQ15CSDT HAS BEEN COPIED 
IGW01551I MEMBER VQ15FCT HAS BEEN COPIED 
IGW01550I 3 OF 3 SPECIFIED MEMBERS WERE COPIED 
IEB147I END OF JOB - 0 WAS HIGHEST SEVERITY CODE

Environment

z/os 2.2 - CA Datacom/DB 15.0 new install (non MSM)

Cause

Using DATACLAS different than default.

Resolution

 

Customer needs to add DATACLAS(DEFAULT) parameters to the space allocation statements to resolve a problem with the ACS system not allowing the additional data set allocations with the record format of U."

Additional Information

IGW01513T   RECFM INCOMPATIBLE - INPUT RECFM = iii OUTPUT RECFM = ooo     

- Explanation                                                               

The record format (RECFM) of the output data set is not compatible with th

record format of the input data set. FAMS cannot copy from either a fixed 

length record format to a variable length record format or to the opposite

Additionally, undefined record format data sets can only be copied to data

sets with that same record format.                                        

                                                                          

In the message text:                                                      

     iii            The record format of the input data set.                         

     ooo          The record format of the output data set.                        

                                                                          

- System action                                                             

 The system ends processing of the current invocation.                     

- Operator response                                                         

Invoke FAMS with compatible record format combination.                    

- Programmer response                                                       

Correct the conflicting RECFM specification on the output data set.       

- Source                                                                    

DFSMSdfp and File and Attribute Management Services (FAMS).               

- Routing code                                                              

11