UIM devices in Spectrum are not modeled in the correct hierarchal containers.

Products

• CA Spectrum

Issue/Introduction

UIM devices in Spectrum are not modeled in the correct hierarchal containers, while switching from Legacy integration mode to SpectrumGateway integration mode.

Environment

CA Spectrum version 10.2.3.  
CA UIM version 8.5.1, running spectrum gateway 8.65.

Cause

Duplicate csId’s received as a part of graph from Spectrumgtw probe.

Resolution

10.02.03.PTF_10.2.313 has been created to resolve this.

REQUIREMENTS
SPECTRUM 10.02.00 and 10.02.03 are the prerequisites for installation of this patch.
This patch must be installed on the OneClick Server.

OVERVIEW 

This is a  PTF for the following issue:
Symptom: UIM devices in Spectrum are not modeled in the correct hierarchal containers, while switching from Legacy integration mode to SpectrumGateway integration mode.
Resolution: UIM devices in Spectrum are modeled in the correct hierarchical containers.
(DE356359, 00962873)

Symptom: Event admin models deleted while switching from Legacy integration mode to SpectrumGateway integration mode
Resolution:Event admin models not deleted while switching from Legacy integration mode to SpectrumGateway integration mode.
(DE351677,00973458 )

 

Additional Information

Please contact CA support to request a copy of this patch.