ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Folder Patch is not correct in One Installer INI File: UCYBARUN.ini shows folder name 10 and not 11
Article ID: 87784
Updated On:
Products
CA Automic Workload Automation - Automation Engine
Issue/Introduction
Error Message :
n/a
Folder Path is not correct in Installer INI-File UCYBARUN.ini. There the path starts with 10, but it should be 11, see
This affects only the old installer that is not supported and maintained anymore. The One Installer is not affected and should be used. This old installer will be removed in future version.
n/a
Folder Path is not correct in Installer INI-File UCYBARUN.ini. There the path starts with 10, but it should be 11, see
<Please see attached file for image>
This affects only the old installer that is not supported and maintained anymore. The One Installer is not affected and should be used. This old installer will be removed in future version.
Cause
Root Cause: This affects only the old installer that is not supported and maintained anymore. The One Installer is not affected and should be used. This old installer will be removed in future version.
Environment
OS: Windows
Resolution
This field was added on 30/03/2017. This article has not been updated yet. Refer to the "Description" or "Workaround" sections for solution information.
Attachments
Feedback
Yes
No
Powered by
