Default value for the parameter BACKUP_RETENTION_CHECK is HH:MM:SS and not HH:MM
Article ID: 87635
Updated On:
Products
CA Automic Workload Automation - Automation Engine
Issue/Introduction
Error Message :
N/A
The default value for the parameter BACKUP_RETENTION_CHECK, which is one of the parameters that can be defined in the host characteristics of the variable UC_HOSTCHAR_DEFAULT, is incorrectly described in the v11 documentation.
The default value for this parameter is 00:00:00 (HH:MM:SS) and not 00:00 (HH:MM) as was initially described in the v11 documentation.
Reference
N/A
The default value for the parameter BACKUP_RETENTION_CHECK, which is one of the parameters that can be defined in the host characteristics of the variable UC_HOSTCHAR_DEFAULT, is incorrectly described in the v11 documentation.
The default value for this parameter is 00:00:00 (HH:MM:SS) and not 00:00 (HH:MM) as was initially described in the v11 documentation.
Reference
Environment
OS Version: N/A
Cause
Cause type:
Defect
Root Cause: BACKUP_RETENTION_CHECK's default value inaccurately described in AE v11 documentation.
Defect
Root Cause: BACKUP_RETENTION_CHECK's default value inaccurately described in AE v11 documentation.
Resolution
This field was added on 30/03/2017. This article has not been updated yet. Refer to the "Description" or "Workaround" sections for solution information.
Fix Status: Released
Fix Version(s):
Component(s): Documentation Guides
Automation.Engine 11.2.3 - Available
Automation.Engine 11.1.5 - Available
Fix Status: Released
Fix Version(s):
Component(s): Documentation Guides
Automation.Engine 11.2.3 - Available
Automation.Engine 11.1.5 - Available
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
