DUAS 5: IO server crashes with signal 1 and node does not start anymore

book

Article ID: 87150

calendar_today

Updated On:

Products

CA Automic Dollar Universe

Issue/Introduction

Affects Release version(s): 5

Error Message :

2012-10-28 12:20:37 0002574/uxioserv /UXOS_HdlTermProcess /000000000 - execution handler : SIGNAL = (1) PID = (2574) PPID = (1) GPID = (2574)

2012-10-28 12:20:38 0002589/uxcdjsrv /u_cdj_main /000000000 - CDJ init error (synchronization request returns -2) -> CDJ server stopped

Patch level detected:Dollar Universe 5.1.3
Product Version: Dollar.Universe 5

IO crashes after some data file issues. It is likelt to be due to a file system full that led to a failed reorganization.

Then, during the restart, the IO server could not be started properly. The IO server was stopped after got signal 1, and causing the CDJ to stop. This signal is from OS level. It could mean that the terminal used to start the IO server has been closed. This should not cause problem if the IO server was started properly. 
 

Cause

Cause type:
Other
Root Cause: Following a System issue, the IO server got signal "1".
This signal means that the system hanged-up, causing the CDJ server as well to crash.

Environment

OS: All Linux/Unix

Resolution

Launch an offline reorganization: 

For Windows:
%UXMGR%\ux_vrf_rgz_rst.bat

For Unix or Linux:
$UXMGR/ux_vrf_rgz_rst

Restart the node

Fix Status: No Fix

Additional Information

Workaround :
N/A