When inserting calendar via the command "uxins cal exp mu=* cible=* repl input=INPUT_PATH", an error is shown.

Products

• CA Automic Dollar Universe

Issue/Introduction

Affects Release version(s): 5

Error Message :
When inserting a calendar using the following commands:
uxins cal exp mu=* cible=* repl input=INPUT_PATH

uxins cal exp mu=" " cible=* repl input=INPUT_PATH

uxins cal exp mu=" 00" cible=* repl input=INPUT_PATH

You get the following error message:
##############################
Unknown Management Unit
##############################

Patch level detected:Dollar Universe 5.6.0
Product Version: Dollar.Universe 5.6.0 FX25010

Description :When inserting calendar via the command "uxins cal exp mu=* cible=* repl input=INPUT_PATH", the command is given an error.

Environment

OS: All
OS Version: all OS

Cause

Cause type:
By design
Root Cause: From Dollar Universe commands manual:Therefore " * " is not a valid character for keyword "cible".Calendar insertion should be done for one MU at a time only.

Resolution

Please refer to the commands manual, the calendars should be deployed to a management unit.
Here is the extract of the manual:
###############################
uxins CAL
[SOC]= format:6c default:S_COMPANY
[NODE]= format:10c default:S_NOEUD
[EXP | SIM | INT | APP] default:S_ESPEXE
MU= format:10c *
CIBLE= format:(MU_code,...)
[REPL]
INPUT=file_name
###############################

If only defined one MU called MAIN_MU, then use CIBLE=MAIN_MU

Fix Status: No Fix
 

Additional Information

Workaround :
N/A