Bad offset in processing date
Article ID: 86889
Updated On:
Products
CA Automic Dollar Universe
Issue/Introduction
Error Message :
No error message but the applied processing date is wrong, this can be checked in the UVC Job Runs view
Patch level detected:Dollar Universe 6.4.01
Product Version: Dollar.Universe 6.4.01
Description :Tasks with an offset based on working day for the processing date, that are launched a closed day, are executed with a wrong processing date.
No error message but the applied processing date is wrong, this can be checked in the UVC Job Runs view
Patch level detected:Dollar Universe 6.4.01
Product Version: Dollar.Universe 6.4.01
Description :Tasks with an offset based on working day for the processing date, that are launched a closed day, are executed with a wrong processing date.
Cause
Cause type:
Defect
Root Cause: If the launching date is a closed day, the offset is not being calculated from this date but from the previous or next working day (It depends on the offset definition :previous or next working day).
Defect
Root Cause: If the launching date is a closed day, the offset is not being calculated from this date but from the previous or next working day (It depends on the offset definition :previous or next working day).
Environment
OS: All
Resolution
As usual, before upgrading any Product, please refer to our Compatibility Matrix to make sure that this target version is compatible with the OS you have and the others product you use, especially the Univiewer server and console versions
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.5.21
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.5.21
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
