After upgrading to FX25006, the IO would not start.
Article ID: 86392
Updated On:
Products
CA Automic Dollar Universe
Issue/Introduction
Affects Release version(s): 5
Error Message :
uxioserv.log shows:
Patch level detected:Dollar Universe 5.6.0
Product Version: Dollar.Universe 5.6.0 FX25010
Description :DU5.6 node was running on patch FX24932, after upgrading to FX25006, the IO would not start.
Error Message :
uxioserv.log shows:
Patch level detected:Dollar Universe 5.6.0
Product Version: Dollar.Universe 5.6.0 FX25010
Description :DU5.6 node was running on patch FX24932, after upgrading to FX25006, the IO would not start.
Cause
Cause type:
Configuration
Root Cause: This is a result of a configuration issue. The library path is hardcoded to be /usr/lib/libux_v560. For example,
106943 -r-xr-xr-x 1 univa universe 125149 Apr 17 2012 /usr/lib/libux_v560/libkumpapi.a
However, $U upgrade is updating the libraries in /opt/universe/UNIV56/exec/lib. So, after the upgrade, the IO can not find the proper library.
Configuration
Root Cause: This is a result of a configuration issue. The library path is hardcoded to be /usr/lib/libux_v560. For example,
106943 -r-xr-xr-x 1 univa universe 125149 Apr 17 2012 /usr/lib/libux_v560/libkumpapi.a
However, $U upgrade is updating the libraries in /opt/universe/UNIV56/exec/lib. So, after the upgrade, the IO can not find the proper library.
Environment
OS: IBM AIX
Resolution
The solution is to use the default setting, use a soft link like below.
/usr/lib/libux_v560 -> /opt/universe/UNIV56/exec/lib.
Fix Status: No Fix
/usr/lib/libux_v560 -> /opt/universe/UNIV56/exec/lib.
Fix Status: No Fix
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
