ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
uxtra UPR does not transfer the uproc script.
Article ID: 86342
Updated On:
Products
CA Automic Dollar Universe
Issue/Introduction
Error Message :
No error message
Patch level detected:Dollar Universe 6.0.00
Product Version: Dollar.Universe 6.0.0
Description :uxtra UPR: Transfers the Uprocs to another area (same company and same node).
The command transfers the uproc and all the dependencies, but it does not transfer the uproc script.
Reproduction steps:
1- In the app area, create a uproc 'TEST' with INT script 'set resexe=0'
2- run the uxtra command to transfer the uproc from the APP area to the EXP area:
uxtra UPR app UPR=TEST TESP=X
3- run the uxshw command in the EXP area:
uxshw UPR UPR=TEST
The uproc script will not be found, you can confirm the result in UVC.
No error message
Patch level detected:Dollar Universe 6.0.00
Product Version: Dollar.Universe 6.0.0
Description :uxtra UPR: Transfers the Uprocs to another area (same company and same node).
The command transfers the uproc and all the dependencies, but it does not transfer the uproc script.
Reproduction steps:
1- In the app area, create a uproc 'TEST' with INT script 'set resexe=0'
2- run the uxtra command to transfer the uproc from the APP area to the EXP area:
uxtra UPR app UPR=TEST TESP=X
3- run the uxshw command in the EXP area:
uxshw UPR UPR=TEST
The uproc script will not be found, you can confirm the result in UVC.
Cause
Cause type:
Defect
Root Cause: N/A
Defect
Root Cause: N/A
Environment
OS: Windows
OS Version: All
OS Version: All
Resolution
This is fixed since Dollar Universe 6.0.14
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.0.0
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.0.0
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
