Cyclic tasks: Each iteration is launched one hour later after European Daylight Saving Time (27th March 2016)

Article Id: 86329

Status: Published

Updated On: 15-04-2018 08:03

Legacy Id: 000012596

Products:

CA Automic Dollar Universe

Issue/Introduction:

Error Message :
No error appear on the log

Patch level detected:Dollar Universe 6.4.01
Product Version: Dollar.Universe 6.4.01

Description :After the DST that occurred on 27th March 2016 in European timezone, the cyclic tasks are relaunched not after the defined interval, but 60 minutes later.

Example: you have a cyclic task that is supposed to be launched every 5 minute, the next one will be done 1h 5 min after the first launch instead of 5 min.

Cause:

Cause type:
Defect
Root Cause: N/A

Environment:

OS: All

Resolution:

In order to workaround the issue, the following needs to be done:
1. Export to an Excel or text file the list of Tasks so that you can remember the ones that were in status Enabled before any modification
2. Disable all the Enabled tasks
3. Enable only those that were Enabled in the past ( refer to the file exported on the step 1)

The solution consists on upgrading to Dollar Universe 6.6.02

Fix Status: Released

Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.6.02

Additional Information:

Workaround :
N/A