ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Management Server is not starting
Article ID: 86216
Updated On:
Products
CA Automic Sysload
Issue/Introduction
Affects Release version(s): 5
Error Message :
In the sldmgts.log file :
Patch level detected:Sysload Management Server 5.60
Product Version: Sysload 5.6.0
Description :When using the "sysload.sh start" command the Communication Server starts, but the Management Server doesn't.
Error Message :
In the sldmgts.log file :
Patch level detected:Sysload Management Server 5.60
Product Version: Sysload 5.6.0
Description :When using the "sysload.sh start" command the Communication Server starts, but the Management Server doesn't.
Cause
Cause type:
Defect
Root Cause: N/A
Defect
Root Cause: N/A
Environment
OS: All Unix
Resolution
Change the start sequence order in the sysload_conf.txt file :
replace "products-boot=management_server,communication_server" with "products-boot=communication_server,management_server"
Fix Status: Released
Fix Version(s):
Component: Management Server
Version: Sysload 5.6.0
replace "products-boot=management_server,communication_server" with "products-boot=communication_server,management_server"
Fix Status: Released
Fix Version(s):
Component: Management Server
Version: Sysload 5.6.0
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
