ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
The Publisher command unicheckpub failed.
Article ID: 86163
Updated On:
Products
CA Automic Dollar Universe
Issue/Introduction
Affects Release version(s): 5
Error Message :
The following error message is present when executing the command unicheckpub from the command prompt.
C:\ORSYP\Publisher\exec>unicheckpub.bat
Patch level detected:Publisher 3.1.0
Product Version: Dollar.Universe 5.6.0 FX25010
Description :The Publisher commands such as the unicheckpub failed.
Error Message :
The following error message is present when executing the command unicheckpub from the command prompt.
C:\ORSYP\Publisher\exec>unicheckpub.bat
Patch level detected:Publisher 3.1.0
Product Version: Dollar.Universe 5.6.0 FX25010
Description :The Publisher commands such as the unicheckpub failed.
Cause
Cause type:
Configuration
Root Cause: There is/are space(s) after the hostname of the Publisher node in the uxsrsrv.sck file. For example:
PMISORS1 calpmpst02
Configuration
Root Cause: There is/are space(s) after the hostname of the Publisher node in the uxsrsrv.sck file. For example:
PMISORS1 calpmpst02
Environment
OS: All
OS Version: ALL
OS Version: ALL
Resolution
Remove the space(s) after the hostname of the Publisher node in the uxsrsrv.sck file located in mgr directory of the Publisher installation.
Fix Status: Released
Fix Version(s):
Component: Publisher
Version: Dollar.Universe 5.6.0 FX25010
Fix Status: Released
Fix Version(s):
Component: Publisher
Version: Dollar.Universe 5.6.0 FX25010
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
