The uxupdque command does not accept the wildcard "*" in addmu parameter
Article ID: 85602
Updated On:
Products
CA Automic Dollar Universe
Issue/Introduction
Error Message :
If you try to add a management unit limit on the previously created batch queue via the command uxupdque with the name SON*, it will fail:
C:\Automic\DUAS\TST600_NB120285\bin>uxupdque soc=TST600 esp=X queue=PHY_1 addmu="SON*:1"
Patch level detected:Dollar Universe 6.1.00
Product Version: Dollar.Universe 6.1.0
Description :It is impossible to create a queue with the wildcard "*" inside the management unit name on the parameter "addmu"
If you try to add a management unit limit on the previously created batch queue via the command uxupdque with the name SON*, it will fail:
C:\Automic\DUAS\TST600_NB120285\bin>uxupdque soc=TST600 esp=X queue=PHY_1 addmu="SON*:1"
Patch level detected:Dollar Universe 6.1.00
Product Version: Dollar.Universe 6.1.0
Description :It is impossible to create a queue with the wildcard "*" inside the management unit name on the parameter "addmu"
Environment
OS: All
Cause
Cause type:
Defect
Root Cause: The wildcard character "*" used to be interpreted in the parameter addmu, whereas it should not.
Defect
Root Cause: The wildcard character "*" used to be interpreted in the parameter addmu, whereas it should not.
Resolution
Update to the fix version listed below or a newer version if available.
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.8.01
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 6.8.01
Additional Information
Workaround :
N/A
N/A
Feedback
Yes
No
Powered by
