Cannot reorganize execution history file
Article ID: 85288
Updated On:
Products
CA Automic Dollar Universe
Issue/Introduction
Affects Release version(s): 5
Error Message :
During an online reorganization universe.log shows:
ERROR : cannot write in file ///temp/u_fmhs50___X.dta
Patch level detected:Dollar Universe 5.6.0
Product Version: Dollar.Universe 5.6.0 FX25010
Description :Cannot reorganize execution history file
Error Message :
During an online reorganization universe.log shows:
ERROR : cannot write in file ///temp/u_fmhs50___X.dta
Patch level detected:Dollar Universe 5.6.0
Product Version: Dollar.Universe 5.6.0 FX25010
Description :Cannot reorganize execution history file
Cause
Cause type:
Configuration
Root Cause: This kind of error can occur when:
- Data file reaches 2 Go
Configuration
Root Cause: This kind of error can occur when:
- Data file reaches 2 Go
Environment
OS: All Unix
OS Version: All Unix
OS Version: All Unix
Resolution
Optimize the purge retention in order to avoid big data files and be sure to have enough free disk space on Dollar Universe file system and Temp directory.
If you are using the U_IO_PURGE_ENABLE purge, you can decrease the parameters for the historic retention then reload the parameters with loadpurparfic command.
More details are available in the adm documentation.
If you want to initialize the historic files, you can use the following manipulation:
Please note that it's only a workaround, the solution is to optimize the purge retention and so, avoid that these files reach 2Go.
- Load the Dollar Universe environment:
. ./uxsetenv
-Stop your Dollar Universe Company
./uxshutdown
-Check that your company is well stopped
Type the following unix command:
ps -ef | grep ux
No uxioserv processes should remain alive for this company.
- Backup the files of the concerned area:
u_fmhs50.*
u_fmph50.*
- Launch the following commands (example with production area)
./uxrazfic u_fmhs50 X
./uxrazfic u_fmph50 X
-Run the reorganization from the bin directory:
./ux_vrf_rgz_rst
-Restart the company
./uxstartup
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 5.6.0 FX25010
If you are using the U_IO_PURGE_ENABLE purge, you can decrease the parameters for the historic retention then reload the parameters with loadpurparfic command.
More details are available in the adm documentation.
If you want to initialize the historic files, you can use the following manipulation:
Please note that it's only a workaround, the solution is to optimize the purge retention and so, avoid that these files reach 2Go.
- Load the Dollar Universe environment:
. ./uxsetenv
-Stop your Dollar Universe Company
./uxshutdown
-Check that your company is well stopped
Type the following unix command:
ps -ef | grep ux
No uxioserv processes should remain alive for this company.
- Backup the files of the concerned area:
u_fmhs50.*
u_fmph50.*
- Launch the following commands (example with production area)
./uxrazfic u_fmhs50 X
./uxrazfic u_fmph50 X
-Run the reorganization from the bin directory:
./ux_vrf_rgz_rst
-Restart the company
./uxstartup
Fix Status: Released
Fix Version(s):
Component: Application.Server
Version: Dollar.Universe 5.6.0 FX25010
Additional Information
Workaround :
N/A
N/A
Feedback
Powered by
