Creating graphs in Sysload Agent for Hyper-V 5.80c results in "Consolidated data will not be historized because value exceeds limit (number is too big)"

Article Id: 84753
Status: Published
Updated On: 15-04-2018 08:02
Legacy Id: 000013846
Products:
CA Automic Sysload
Issue/Introduction:

Affects Release version(s): 5

Error Message :
[sldhyperv] WARNING - Consolidated data will not be historized because value exceeds limit (number is too big). [Perflib.Hyper-V Hypervisor Virtual Processor.% Hypervisor Run Time_G - SBA#1#2501170220#60341292800] 
[sldhyperv] WARNING - Consolidated data will not be historized because value exceeds limit (number is too big). [Perflib.Hyper-V Hypervisor Virtual Processor.% Total Run Time_G - SBB#1#2501170220#60340601600] 
[sldhyperv] WARNING - Consolidated data will not be historized because value exceeds limit (number is too big). [Perflib.Hyper-V Hypervisor Virtual Processor.% Guest Run Time_G - SB9#1#2501170225#60340672000] 

When using the Sysload Agent for Hyper-V 5.80c unable to create graphs using these metrics: 

  • Hyper-V Hypervisor Virtual Processor ; % Guest Run Time
  • Hyper-V Hypervisor Virtual Processor ; % Hypervisor Run Time 
  • Hyper-V Hypervisor Virtual Processor ; % Total Run Time 
The above errors appear in the sldhyperv.log file.

 

Cause:

Cause type:
Defect
Root Cause: Collected data by agent will not be historized because value exceeds limit (number is too big).

Environment:

OS: Windows
OS Version: N/A

Resolution:

  1. Install Agent for Hyper-V version 5.80 
  2. Replace the "sldhyperv.exe" with the fix "ag_hyperv_5.80d_test" in the HyperV install directory.


Fix Status: Released

Fix Version(s):
Component: Sysload Agent for Hyper-V 

Fix version: ag_hyperv_5.80d_test - controlled availability ( contact Support for obtaining the fix)

Additional Information:

Workaround :
N/A