The client is doing a JCL install of CA Intertest and Symdump R 10 and the apply step fails with message GIM23911E Link edit failed MODULE IN25SYMP IN LMOD IN25SYMP
Article ID: 7922
Updated On:
Products
Issue/Introduction
The client is doing a JCL install of CA Intertest and Symdump R 10 and the apply step fails return code 12 with message GIM23911E.
GIM23911E ** LINK-EDIT PROCESSING FOR SYSMOD CAVHA00 FAILED FOR MODULE IN25SYMP IN LMOD IN25SYMP IN THE CAVHLOAD
LIBRARY. THE RETURN CODE (08) EXCEEDED THE ALLOWABLE VALUE. DATE 17.235 - TIME 14:06:05 - SEQUENCE NUMBER
000077 - SYSPRINT FILE SMP00111.
IEW2322I 1220 1 INCLUDE SMP00069(IN25PLVA) CAVHA00
IEW2322I 1220 2 ORDER CEESTART
IEW2322I 1220 3 ENTRY CEESTART
IEW2322I 1220 4 NAME IN25PLVA(R) MAX ACCEPTABLE RC=04
IEW2456E 9207 SYMBOL IBMQBDDA UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL IBMQBDTI UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM THE DESIGNATED CALL LIBRARY.
IEW2456E 9207 SYMBOL IBMQHCAA UNRESOLVED. MEMBER COULD NOT BE INCLUDED FROM THE DESIGNATED CALL LIBRARY.
Environment
Cause
The installation LE DDDEF(SCEELKED) was pointing to the wrong LE library that contains modules IBMQBDDA, IBMQBDTI, IBMQHCAA, IBMQFRG, IBMQOFNT and IBMQOFGS. So when applying the FMID’S the link edit on some of the load modules failed due to the missing LE modules.
Resolution
Alter the contents of the CA Intertest and Symdump r 10 CSI and update the LE DDDEF(SCEELKED) to point to the correct LE library. Here at CA the LE library that contains these modules is called CEE.SCEELKED. Below is the DDDEF and an example of the modules located in the CEE.SCEELKED.
ADD DDDEF(SCEELKED) SHR DA(CEE.SCEELKED)
Then do an apply REDO.
BROWSE CEE.SCEELKED Row 0008067 of 0010927.
Name Size TTR AC AM RM
_________ IBMQBDDA 00000018 01A513 00 31 ANY
_________ IBMQBDTI 00000018 01A632 00 31 ANY
_________ IBMQHCAA 00000018 01C346 00 31 ANY.
Feedback
