ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
VSE recorder not capturing transactions
Article ID: 76489
Updated On:
Products
CA Application Test
Service Virtualization
CA Continuous Application Insight (PathFinder)
Issue/Introduction
VSE recorder is not capturing transactions when a test case is executed in DevTest Workstation.
Cause
One reason could be, Testcase endpoint is not configured to point to VSE recorder which causes the issue.
Environment
All supported DevTest environments.
Resolution
Configuring the endpoint to point to VSE Recorder will resolve the issue.
Additional Information
. https://docops.ca.com/devtest-solutions/10-1/en/using/using-ca-service-virtualization/using-devtest-workstation-with-ca-service-virtualization/creating-service-images/create-a-service-image-by-recording/ssl-with-vse-recording
. https://docops.ca.com/devtest-solutions/10-1/en/using/using-ca-service-virtualization/using-devtest-workstation-with-ca-service-virtualization/creating-service-images/create-a-service-image-by-recording/transport-protocols/http-s-transport-protocol
. https://docops.ca.com/devtest-solutions/10-1/en/using/using-ca-service-virtualization/using-devtest-workstation-with-ca-service-virtualization/creating-service-images/create-a-service-image-by-recording/transport-protocols/http-s-transport-protocol
Feedback
Yes
No
Powered by
