Spectrum 10.2.1 cannot communicate with UIM 8.5.1 over HTTPS

Article Id: 6735

Status: Published

Updated On: 14-02-2018 07:55

Legacy Id: TEC1268767

Products:

CA Spectrum , CA Spectrum , CA Spectrum , CA Spectrum

Issue/Introduction:

Spectrum 10.2.1 cannot communicate with UIM 8.5.1 over HTTPS

Cause:

Secure communication between Spectrum and UIM using HTTPS as the protocol was not possible.

Environment:

Spectrum 10.2.1UIM 8.5.1

Resolution:

10.02.01.PTF_10.2.115 provides a UI option to configure the protocol (HTTP, HTTPS) to be used for communication between Spectrum and UIM.

Additional Information:

Please contact CA Spectrum Support if this fix is needed.