I am receiving the following error when trying to save my Agile Designer flow to Test Data Manager:
Cannot save visual flows to this level. Please select a level which allows saving visual flows (such levels are marked in green).
<Please see attached file for image>
The reason you are seeing this error message is because you cannot save a flow to a Version level. If you do not have anything else showing besides the project and version folder, you will need to create at least a Data Group under that project to save your flow to. Make sure to have the Data Group/Set/Pool as type 'Agile Designer' and set to be 'Available on Demand'.
CA Agile Requirements Designer (ARD)- Agile Designer
First you need to make sure you have a Data Group, Data Set, and Data Pool created in Datamaker for the Project you are trying to save to. Follow the steps in this documentation on how to create a project: https://docops.ca.com/ca-test-data-manager/4-1/en/provisioning-test-data/configure-test-data-reservation-service/configure-form-based-test-data-reservation-service/test-matching-and-re-matching/create-project-in-datamaker
Right click on your Data Pool (or whichever group you are saving your flows to) and choose the 'Properties' option.
<Please see attached file for image>src="/servlet/servlet.FileDownload?file=0150c000004AKLYAA4" alt="data pool properties option.png" width="905" height="311">
In your 'Edit' window, do the following:
- Check the box for 'Available on demand'
- Under the 'Type' dropdown, choose the 'Agile Designer' option.
- Click the Save icon to save your changes.
Once this has been done in Datamaker, you will be able to see the hierarchy in ARD and be able to access/save to without error.
<Please see attached file for image>src="/servlet/servlet.FileDownload?file=0150c000004AKLcAAO" alt="type agile designer in dp properties.PNG" width="609" height="619">
In Agile Designer, try to save your flow to Datamaker again. You should see the Data Group/Set/Pool and be able to save successfully.
<Please see attached file for image>src="/servlet/servlet.FileDownload?file=0150c000004AKLZAA4" alt="save as to repo ard.png" width="359" height="227">
<Please see attached file for image>src="/servlet/servlet.FileDownload?file=0150c000004AKLaAAO" alt="save flow as ard1.PNG" width="375" height="665">
<Please see attached file for image>src="/servlet/servlet.FileDownload?file=0150c000004AKLbAAO" alt="save success.PNG" width="506" height="304">
If you experience any further issues, please open a support case on https://support.ca.com/irj/portal/newhome or call support at one of these numbers https://www.ca.com/us/services-support/ca-support/contact-support.html.
Below is documentation on how to use ARD with TDM and TDoD: