The CA UIM 8.51 to CA Spectrum 10.2 alarms are missing the "Probe Name" and "Origin" fields.

Article Id: 6417
Status: Published
Updated On: 30-07-2019 11:18
Legacy Id: TEC1399796
Products:
CA Spectrum - OneClick , CA Spectrum - Reporting , CA Spectrum - Integrations , CA Spectrum - Alarms & Event Management , CA Unified Infrastructure Management On-Premise (Nimsoft / UIM)
Issue/Introduction:

CA UIM 8.51 alarms that being passed through the spectrumgtw probe and being displayed in Spectrum alarms have two missing fields: "Probe Name" and "Origin"

<Please see attached file for image>

Probe_Name_and_Origin_blank.png

 

Cause:

Those two fields are not being passed by the spectrumgtw probe.

Environment:

CA Spectrum 10.2 and CA UIM 8.51

Resolution:

Upgrade the CA Spectrum to 10.2.1 release and deploy the new spectrumgtw probe version 8.60 on the CA UIM side.

CA Spectrum 10.2.1 release can be downloaded from Download Center.

The spectrumgtw probe 8.60 release can be downloaded within UIM Archive. If the UIM Archive can't find it, you can manually download it from http://support.nimsoft.com and copy to the Archive.

insert_drive_file 1558625285515000006417_sktwi1ysjvsbg8u7.png
arrow_downward Download