ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Physical Memory metrics not recognized for Riverbed device in snmpcollector probe
Article ID: 6314
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
NIMSOFT PROBES
Issue/Introduction
Physical Memory metrics not recognized for Riverbed device in the snmpcollector probe.
In the below image, Swap Memory is displayed under Physical Memory - It is an incorrect behavior.
<Please see attached file for image>
Cause
A component defect.
Environment
snmpcollector v3.21
The problem has been identified with Riverbed devices, but could be identified with a device which uses UC Davis MIB based certification to represent Physical Memory metric.
- snmpcollector v2.26 does not have this problem.
The problem has been identified with Riverbed devices, but could be identified with a device which uses UC Davis MIB based certification to represent Physical Memory metric.
- snmpcollector v2.26 does not have this problem.
Resolution
Defect fixed with DCD 1.5
1. Please deploy the latest DCD and restart snmpcollector probe.
2. Run Force component re-discovery against Riverbed profile.
<Please see attached file for image>
Attachments
Feedback
Yes
No
Powered by
